Qlar Japan

Loss In Weight feeder for laboratory and small scale plants
The loss in weight feeder ProFlex® C100 rounds off the existing
feed system ProFlex® C, that is established in the compoundand master batch industry already, to smaller feed rates (~0.1 – 100 l/h).

[Feature]
 Flexible feed hopper with external Multi-Point Agitation
 Integrated plug-on gearbox with total range of 1:5 in 6increments
 Quick change hopper
 Asymmetric geometry
 Interchangeable drive side

[Configuration]
 The ProFlex® C100 continues embodying the features of the existing feed system ProFlex® C:
 Flexible feed hopper with external 8-point agitation
 Easy dismantling of components for feed rate adoption or cleaning with just one tool
 Possibility to interchange drive and discharge side
 Asymmetric geometry for space efficient arrangement
 Fed rate adoption by rich scope of helixes and screws in two different discharge lengths
 Integrated gravimetric isolation with optional pressurecompensation
 Cover with ferrules manual refill available
 Reduction of pulsation at low rpm by special discharge geometry
 Easy-to-use shipping bracket
 Hidden cabling to minimize the risk for shunt forces

Modular loss-in-weight (LIW) feeder system for high capacities.
The optimal solution for handling cellulose, glass fiber, plastic flakes, carbon fiber, and recycled materials.

 Optimized for light, fluffy materials like flakes, fibers and other, organic or inorganic, virgin or recycled materials.
 Full stainless steel construction with internal agitation.
 Modular system with various helix and hopper options.
 Volumetric version to be used as refill feeder / surge bin.
 Optimized refill system by application is available.

[Feature]
The SIMPLEX FB is a high capacity, stainless steel, LIW feeder platform for light, fluffy materials like plastic flakes,
cellulose, hemp, glass or carbon fibers and other virgin or recycled materials.
It is mainly used in plastic film extrusion and compounding applications.

[Configuration]
The flat bottom design with vertical hopper walls and bottom driven agitator provides excellent mass flow
and utilizes the maximum inlet area of the auger to support feeding of cohesive materials.
The bottom driven agitator supports low center of mass and maximum access to the inlet area for refilling and venting purposes.

 Dosing equipment for volumetric and gravimetricfeeding of bulk solids
 Maintenance-free vibration discharge and feed hopper type CS
 Fast, easy disassembly for cleaning and changing bulk solids
 Integrated measurement, control and regulation electronics
 High feeding accuracy and consistency, below ±0.5%

[Feature]
Dosing equipment is used for continuous volumetric and gravimetric feeding of bulk solids such as powders, granulates,chips, flakes and fibers.
Typical applications can be found across the board in all industries, though principally in the plastics, chemicals, foodstuffs, detergents and pharmaceuticals industries.

[Configuration]
The MET type Coni-Steel vibration feeder comprises the vibrating feeder with a vibration drive, the feed hopper, the extension
hopper and a support structure. In gravimetric operation, the gravimetric feeder includes two weighing modules. The geometry
of the feed hopper of the MET vibrating feeder ensures reliable product flow into the vibrating feeder.
The extension hopper is available in different sizes for customization based on feed rate and application.

MET Min loss-in-weight feeder is used for continuous dosing or batching of powders in very small quantities.

 Gravimetric feeder for small quantities with dual shaft and vertical agitator
 Easy disassembly for cleaning and discharge unit replacement
 4-litre tank, negatively conical with bottom-reaching agitator for manual filling
 8-litre tank, conical with wall- and bottom-reaching agitator and lid with nozzles
 Optional protective housing to minimize environmental interference

[Feature]
The drive and weighing equipment are housed in a dust-proofed enclosure.
The one-piece discharge floor is made from high-quality plastic,ledge-free, and easy to clean.
The bottom-reaching vertical agitator is easy to disassemble and ensures a uniform filling level of the discharge units.

[Configuration]
The negatively conical 4-litre tank, equipped with a bottom-reaching agitator, is manually filled and used for small capacities.
The conical 8-litre tank, with a wall-reaching agitator, includes a lid and refill nozzle, suitable for larger capacities.
For smaller capacities, a protective housing is recommended to minimize external interference.

MULTICOR mass flow-rate feeding devices are used wherever large amounts of bulk solids need to be continuously established, controlled and fed.
They provide precise feeding according to the Coriolis principle.

 High accuracy +/- 0.5 % (typically)
 Continuous mass flow measurement according to the Coriolis principle
 Solution for accurate measurement of high throughput
 Rugged design
 Easily integration
 Dusttight housing

[Feature]
The performance is remarkable: The material stream with an accuracy of ±0.5%. Precise and very economical, whether it is used for dust, throughput and consumption measurement for in-plant inventory, polymer feeding in granulating plants.

[Configuration]
The bulk solids hit a rotating measuring wheel. Due to the centrifugal force, the bulk solid particles on the vane are moved outwards.
On the measuring wheel – due to the acceleration in the direction of the circumference – the bulk solids are subject to the Coriolis force.
This can be recorded as a measurable variable which is proportional to the gravimetric feed rate, even with changing bulk density or different grain size.

Qlar Dome valve is reputably the most effective fast closing, bulk material handling valve in the world.
The Original Dome Valve was developed in 1974 for usewith pneumatic conveying system and as a standalone product.

» A robust full-bore valve designed specifically for handling highly abrasive products,
offering excellent performance with high-pressure and high-temperature materials.
» Suitable for cement, sand, fly ash, coal, blast furnace materials, gypsum, copper concentrate, limestone, wood waste, and wood chips.
» ATEX Zone 20 internal compliance
» Diameters from 50 to 1,000 mm
» Suitable for applications ranging from full vacuum up to 35 barg
» Highly effective, airtight sealing
» During operation, the seat ring moves away from the dome, significantly reducing sliding friction.
» Standard material temperature: up to 220°C; special versions available for temperatures up to 750°C

Depending on the application, cast iron, Teflon-coated, or stainless steel versions are available.
Can be used as an automated on/off valve with either a pneumatic cylinder or vane-type actuator, combined with a solenoid valve.
An ideal replacement solution for gate valves and butterfly valves.