Products Search

Bravender mixers and extruders help optimize processing conditions through the mixing and molding evaluation of high-viscosity resins. When integrated with a Raman spectrometer, they enable spectral analysis of the mixing and extrusion conditions.

We manufacture industrial rubber products tailored to customer requirements using special rubber materials and processing technologies. Special materials include "PFAS-free fluorine rubber," "S-finish," "Semi-con rubber", "Meta rubber" and "Aqua rubber."

World's smallest class 0.08mm pitch connector (Pin:16x2), LCP. Overall size 2.80 x 2.50 x 0.50mm, weight 0.0025g.

We provide flow modifiers, heat stabilizers, compatibilizers, and coupling agents to enhance the performance of plastic materials and contribute to the development of high value-added products.

The main stocker unit can be connected to standard units, allowing for flexible layout configurations.
It accommodates commercially available containers, enabling implementation without the need to switch to different containers.
Changes in container size after installation can be accommodated by swapping chuck jaws and adjusting guides (within specified limits).

Precision injection molding of Super Engineering Plastics, including PEEK, PPS, PPSU, and PEI.

From material selection and mold design & fabrication to molding, secondary processing, and inspection — all under one roof.

Proven mass-production experience in medical, industrial, plumbing, aerospace, and electronics applications.

Have a part you want to make from plastic? Talk to us from the early concept stage.
-- English Website --
https://www.sanyo-ssc.co.jp/en/

Energy-saving twin-screw extruder with permanent magnet direct drive for efficient, stable, and reliable production.

GTW-100AT Auto Cut Control Board is an intelligent control system designed for plastic gate cutting nippers and hot air cutters. High-precision automatic control reduces operator-related variation and cutting defects, while improving cutting accuracy, consistency, and production speed. Designed to support production-line automation, GTW-100AT helps manufacturers achieve higher productivity, stable quality, and a more efficient manufacturing process.

All adjustment bolts can be adjusted simultaneously.
It is more energy-efficient than the thermal bolt adjustment system.

It all starts with the smallest one...

- Perfect to perform series of laboratory scale tests for formulation and product development
- The smallest ENTEX extrusion system ENTEX 30

The salad box is made of highly transparent PET or RPET material, which is suitable for fresh food, sliced fruits, or nut snacks.
With complete specifications, it can effectively meet any type of food packaging needs.
Features:
1. Patented tamper-evident packaging.
2. Prevent food from being spilled during transportation.
3. Use highly transparent recycled PET materials.
4. Sturdy construction can accept stacking.
5. Reusable and recyclable.
6. Heat resistant 60°C / 140°F.
7. Suitable for automated production.

Efficiently grinds plastic runners and molding rejects. Low-noise, energy-saving granulators designed for easy cleaning.

We design and manufacture injection molds for plastic products, serving a wide range of industries including home appliances, medical products, and general consumer goods. Drawing on more than half a century of experience and expertise in mold manufacturing, we provide molds tailored to our customers’ requirements. As part of the Micro Fasteners Group, we support plastic molding applications through expertise in both insert nuts and injection molds.

XPS production line using supercritical CO₂ foaming technology for high-quality insulation boards with efficient production.

The SU-5000NUV laser marker is designed as an integrated optoelectronic unit
and adopts the latest vector control algorithm,
achieving a printing speed up to 200% higher than standard products on the market.
Its unique laser technology enables stable, high-quality marking on a wide variety of materials.
With low maintenance requirements, no consumables, and a cooling system combining water cooling and air cooling,
it achieves both safety and reduced environmental impact while enabling high-quality, durable marking.

0.5–1.5 mm Mini Pellet Processing

We provide contract processing of mini pellets (micro pellets) in sizes ranging from 0.5 to 1.5 mm.
Small-lot prototyping is also available.

Mini pelletizing can offer new possibilities for resin materials, including:

Improved dispersion
Faster melting
Reduced variation in pellet size

If you are looking to control melting speed, achieve more uniform mixing, or have other challenges with resin processing, please feel free to contact us.

VibroDyn is an equipment to alleviate or remove internal stress in metals using vibrational energy

A site management system that visualizes the inefficiency and uneveness in the molding plant to create an optimal molding environment. it maximizes the plant's potential by improving productivity. It communicate with the on-site terminal LIT, which is directly connected to the molding machine, enables real-time and accurate monitoring of the operating status of all molding machines regardless of the manufacturer. You can check past production conditions and even information about short stops, which is difficult to manage by hand, on the operation chart.

INARI M06/M12 are compact manual injection molding machines that let you focus on molding at your own pace, right on a tabletop. We rethought the mechanics of conventional injection molding machines from the ground up, developing a proprietary injection method that combines functionality with easy maintenance and a design that reduces stress on the mold. Despite their compact size, the machines support a wide range of techniques, including insert molding and two-color molding.

Two rental services are available for different needs. The Waste Plastic Recycling Workshop Set Rental Service lets participants experience the recycling process by molding with waste plastic, making it useful for educational activities. The INARI Trial Set Rental Service allows customers considering a purchase to try the machine in their usual workspace.

At the exhibition, we will demonstrate molding animal-shaped magnets with INARI M06. Visitors are welcome to take a molded magnet home as a sample. INARI M12 will also be on display.

Price: From ¥298,000 (tax included)
Product page: https://www.originalmind.co.jp/products/inari

The plastic thermoforming machine is European design, intelligent control, lightweight.
Convenient thermoforming mold change, quick, suitable for smaller quantities and diverse production line manufacturing.
High rate of movement, low failure rate, reducing the costs associated with machine errors.
Innovative intelligent system, which gives the operator an easy to use interactive interface which reduces the opportunity for human error.
Remote obstacle monitoring and instantaneous data processing allows rapid problem correction.
High-precision cutting technology, allowing high-speed control, low machinery wear and exceptional cutting performance.
Adjustable, automatic stacking technology, which remembers your last plastic thermoforming production needs.
Applicable to Materials:
PLA. (r)PET. C-PET. PS. PP. PS. OPS. EPS

Applicable to Products:
Cup lids
Clamshell containers, meat tray
Candy/ Cookies packaging trays
Food containers
Medical packaging
Industrial packaging
Blister packaging
Lunch boxes/ salad containers
Egg cartons

AI-Drive Optima compares each shot’s actual values for the selected indicators (e.g., peak fill pressure, minimum cushion) against the targets and automatically tunes process parameters to keep them as close to target as possible.
By counteracting gradual drift caused by disturbances, it helps keep the molding process within a stable operating window during mass production.

PEEK resin injection needle for low-invasive use. OD 0.24mm / ID 0.07mm precision molded. Metal-allergy free and MRI compatible.

DIOSHY-UL Series. Eco-friendly halogen-free flame-retardant specification.
Electrical product safety is paramount. The UL series is UL94-V0 certified for flame retardancy.
Environmental protection is equally vital. We exclusively select premium eco-friendly, halogen-free flame retardants.

At Maxwell, we deliver cutting-edge solutions for after-market parts for underwater pelletizing solutions trusted by the compounding, masterbatches, PCR/PIR recycling and PET/PA/Polyolefins resin industries for their efficiency, consistency, and unmatched service life. We manufacture new and refurbished die plates, pelletizing blades, tapped driving bushes, blade holders with reconditioning and surface grinding services, water-ring pelletizer die plates, cutter compactor blades, laser discs, and scraper shaft/holder/blades etc. With 100% in-house manufacturing and a newly expansion facility, now we can produce die plates from 100 to 1600 mm diameters with electrical oil/steam heating execution, increasing our monthly production capacity from 100 to 400 units per month — ensuring greater precision, consistency, and faster deliveries. We proudly export to over 50 countries, including Colombia, USA, Canada, Germany, Italy, Austria, Netherlands, Belgium, Turkey, Poland, Oman, and Saudi Arabia, and maintain long-term OEM partnerships worldwide.

In this SEN type, elastic plastic (used for liquid silicone L.S.R., etc.) controls the opening and closing of the shut-off mechanism with a compactly designed pneumatic cylinder. The nozzle tip is equipped with a cooling system distributed all the way to the tip of the nozzle tip. These systems function reliably and support stable operation. The materials used are special materials with high corrosion resistance.
The nozzle controls vulcanization and liquid resin flow within the nozzle to ensure a clean and reliable shut-off. This nozzle can also be used for hot molds and cold channel molds that do not have a cooling system.

We are capable of manufacturing cylinders (barrels) with a maximum inner diameter of Ø450 mm and a maximum length of 8,000 mm. We also provide customized recommendations on cylinder (barrel) design, material selection, and other specifications to meet each customer's requirements.In addition, if an existing cylinder (barrel) has worn dimensions, we can perform reverse engineering based on the original component. Furthermore, we offer not only the manufacturing of new cylinders (barrels) but also professional repair and refurbishment services. Please feel free to contact us for any inquiries.

An additive added to improve HDT, Anti-scratch and Tg for thermoplastic resin such as PVC

Benefits
- Improved PVC Heat resistance
- Improved PVC Anti scratchiness

Application examples
- Heat resistant and scratch- improved PVC film (smart card etc.), heat-resistant consumer electronics, heat-resistant sheet, etc.

Mix up to 12 materials with flexibility. Move on to the next production run without removing materials.
The Custom Blender is a multi-material mixing system capable of high-precision mixing of 2 to 12 different materials.

In addition to handling multiple materials, each material is assigned its own dedicated mixing unit. By selecting only the materials required for each production order, the system reduces the need to remove materials for cleaning and replacement.

This also helps streamline material changeovers and purging operations. The system is compatible with both single-screw and twin-screw extruders and can be custom-designed to suit a wide range of applications, from small-volume precision mixing to large-volume mixing.

A nationwide database of mold and die manufacturing plants (2025 edition). It features company information across a wide range of categories, including plastic molds, press dies, die-casting molds, rubber molds, and powder metallurgy molds.
The database covers not only specialized mold manufacturers but also in-house mold-making departments, listing approximately 7,500 facilities.

Flexible automation for insert molding. Easy changeovers enable high-mix production while reducing labor and supporting unmanned operation.

This is our proprietary high-speed rubber deflashing system. Utilizing air, water, and motor-driven rotation, it performs high-speed deflashing with exceptional efficiency. For components like O-rings, a complete deflashing cycle takes approximately 60 seconds.
We have a demonstration unit available at our facility for trial runs and live equipment viewings. Alternatively, you are welcome to send us your product samples, and we will perform a sample trial for you. Please feel free to contact us for more information.

Full speed ahead...

- Throughput up to 12,000 kg/h
- Also available as a ‚heavy-duty‘ series for extended service life

The special tapered outlet structure quickly compresses bulky waste materials and significantly reduces their volume. With a robust welded structure and hydraulic system, it delivers stable performance even during long-term continuous operation.

A flexible control solution featuring a high-performance controller and multi-touch HMI for a wide range of injection molding machines.

Qlar Dome valve is reputably the most effective fast closing, bulk material handling valve in the world.
The Original Dome Valve was developed in 1974 for usewith pneumatic conveying system and as a standalone product.

» A robust full-bore valve designed specifically for handling highly abrasive products,
offering excellent performance with high-pressure and high-temperature materials.
» Suitable for cement, sand, fly ash, coal, blast furnace materials, gypsum, copper concentrate, limestone, wood waste, and wood chips.
» ATEX Zone 20 internal compliance
» Diameters from 50 to 1,000 mm
» Suitable for applications ranging from full vacuum up to 35 barg
» Highly effective, airtight sealing
» During operation, the seat ring moves away from the dome, significantly reducing sliding friction.
» Standard material temperature: up to 220°C; special versions available for temperatures up to 750°C

Depending on the application, cast iron, Teflon-coated, or stainless steel versions are available.
Can be used as an automated on/off valve with either a pneumatic cylinder or vane-type actuator, combined with a solenoid valve.
An ideal replacement solution for gate valves and butterfly valves.

Optimizing Extrusion Molding through Sensing Technology and Digital Transformation

The NexCell® SCF foam elastomer injection forming machine developed by KingSteel and our European Co-Innovation Partner(ECIP) is the world's first "mass production type" SCF foam elastomer injection forming machine. KingSteel's MICS(Multiple injectors and mold clamp systems) core integration technology developed over many decades was used as the development theme to make the SCF foam elastomer injection foaming into a single multi-nozzle. multi-work station, multi-mold machine.

This product is a masterbatch containing a dispersed near-infrared absorbing agent. By incorporating the appropriate amount of this masterbatch, it is possible to design products that combine visible light transparency with near-infrared absorption capabilities.

High quality mold turnover machine.

◆ Covers the full spectrum of injection molding materials, machines, and technologies to meet diverse customer needs!
◆ Explains mold technology, analysis techniques, residual stress countermeasures, secondary processing, and more!
◆ Introduces the latest injection molding technologies utilizing AI and IoT!

B5 size, 674 pages
ISBN: 978-4-86043-934-7 C3058

■ Supervisor: Seiichi Honma
■ Table of Contents
Introduction
Preface: Basic Characteristics of Plastic Injection Molding and Advances in Molding Technology
Chapter 1: Advances in Injection Molding Technology
Chapter 2: Material Development and Injection Molding Technology for Reducing Environmental Impact
Chapter 3: Advances in Mold Technology
Chapter 4: Molding Analysis and Evaluation of Plastic Molded Products
Chapter 5: Residual Stress in Plastic Molded Products and Its Removal
Chapter 6: Secondary Processing Technologies for Plastic Molded Products
Chapter 7: AM (Additive Manufacturing) Technologies and Manufacturing Technologies Utilizing IoT/AI

Precision plastic injection mold parts including ejector pins, ejector sleeves, bushings, locators, springs, air valves, locking blocks, ball plungers, self-lubricating components, and more. Designed for high accuracy, durability, and reliable performance in injection molding applications. Various specifications and custom solutions are available to meet different mold requirements.

Compliant with international biocompatibility regulations, PHOENIX medical-grade product lines are suitable for various medical device requirements in the medical and pharmaceutical industries.

Features
- PVC alternatives / PVC replacement
- latex-free - reducing allergic reactions in some individuals
- injection molding and extrusion manufacturing process
- transparent enough
- soft and smooth touch/appearance
- medical extrusion grade with great kinking resistance
- odorless
- co-extrusion with PP - medical multilayer tubings
- excellent tear resistance and tensile strength
- excellent brittle temperature (-40 ~ -60℃)
- can be sterilized in many ways, including ethylene oxide, Gamma radiation, steam sterilization.
- good flexibility
- resistant to various fluids, such as water, embolism, grease, blood, urine

Applications
-Medical extrusion, such as medical tubing, catheters, uterine balloon tamponades
- Single-use, such as disposable syringe gaskets/syringe plunger seals
disposable syringe gasket/syringe plunger seals
- Soft-touch parts/components of medical devices, such as glass vial caps

A sensor that measures clamping force by detecting strain on the tie bars during mold opening and closing.

Thanks to its magnetic mounting system, no bands or additional mounting fixtures are required, allowing for quick and easy installation.

Wireless communication with a dedicated app eliminates the need for cables, while measurement data can be easily stored and managed on the device.

Up to four tie bars can be measured simultaneously, enabling simultaneous strain measurement and clamping force evaluation.

Introducing a new cyclone dust collection unit featuring a "damper-style" design!
We are unveiling this new unit at the exhibition, designed to make debris disposal easy and reduce the hassle of emptying the dust bin.
The "damper-style" discharge mechanism allows for effortless removal of collected debris, minimizing the effort required during disposal.

We will be showcasing the actual unit at our booth. Please come and see for yourself the groundbreaking design that makes disposal incredibly simple and intuitive!

A complete lineup ranging from compact dehumidifying dryers that mount directly on the molding machine to large-capacity floor-standing models.

■ Product Description

This is a self-lubricating (oilless) bearing manufactured by embedding solid lubricants into a metal base such as high-strength brass or aluminum bronze.
During operation, the solid lubricant particles form a lubricating film on the sliding surface, providing excellent self-lubrication and wear resistance even under completely oil-free conditions.

■ Features

◉ Excellent performance under high load and low-speed conditions, enabling maintenance-free operation without lubrication.
◉ Suitable for various types of motion, including reciprocating, rotating, and oscillating movements, with low friction and low wear.
◉ Maintains stable performance even in harsh environments such as contamination, impact loads, and vibrations.
◉ Ideal for applications where lubrication is difficult or undesirable.
◉ Available in a wide range of standard products as well as customized solutions.

■ Applications

◉ Plastic injection molds
◉ Steel and metal processing equipment
◉ Construction machinery
◉ Hydropower generation equipment
◉ Onshore / offshore industries

TSM Tools standardize mold clamping with measurable torque control, improving efficiency, consistency, and safety. A unique friction-reducing ball mechanism minimizes torque loss at the contact surface. At the same axial force, TSM Tools require only half the force for tightening and one-third the force for loosening compared with conventional methods. Combined with a dedicated torque wrench, they provide consistent clamping with less dependence on operator experience or physical strength.

This BHP type (hydraulic-pneumatic machine bolt type shut-off nozzle) standard shut-off nozzles have enjoyed the benefits of the shut-off action of molten resin in the nozzle, such as reduced cycle time, etc. The BHP nozzle has a larger diameter flow path than the conventional needle type shut-off nozzle. The BHP nozzle is designed to provide a larger diameter flow path than conventional needle-type shut-off nozzles. This allows for a much larger flow path and reduced pressure drop compared to needle shut-off nozzles. The simple single-channel design also avoids the parallel flow seen in needle shutoff mechanisms. The single-channel system allows the unit to be cleaned very quickly (similar to an open nozzle) compared to a needle shutoff nozzle.
In addition, the increased back pressure improves usability (homogeneity) and reduces cycle time, contributing to higher productivity. This makes this nozzle effective in shortening cycle time and suppressing stringiness and fluttering when used in combination with a thermal hot runner. This nozzle is effective in the production of food packages, etc.
A resin filter and mixing element can be added as an option.

◇ Analyzes and evaluates adhesive interfaces in three dimensions and through multifaceted approaches using new methods
◇ Summarizes spatiotemporal phenomena at adhesive interfaces across different scales
◇ Explains various attempts to identify factors leading to failure and degradation
◇ Details the development of novel adhesives utilizing new interface analysis techniques, as well as next-generation adhesive bonding technologies

B5 format, 448 pages
ISBN: 978-4-86043-796-1

■ Table of Contents
Introduction: Interfacial Phenomena in Adhesion and Bonding

Part I: Analysis and Evaluation Methods for Adhesive Interfaces
Chapter 1: Analysis of Adhesive Interfaces
Chapter 2: Simulation Analysis of Adhesive Interfaces
Chapter 3: Characterization Methods for Adhesive Bonding
—Understanding Mechanical Behavior and Failure Initiation Points—

Part II: Development of Adhesives and Next-Generation Bonding Technologies
Chapter 1: Development of Novel Adhesives
Chapter 2: Development of Debondable Adhesives
Chapter 3: Next-Generation Adhesive Bonding Technologies
Chapter 4: Industry-Academia Collaboration and International Trends in Adhesive Bonding Technology

Continuous extrusion line for producing EPS foam beads with excellent cell structure, uniform quality, and sustainable material solutions.

We publish a wide range of domestic and international information and analysis related to the rubber industry and rubber companies, including rubber products (including resin products), rubber materials, labor, and distribution. By leveraging the immediacy of the web, we can publish information even faster than the “Weekly Rubber News” (newspaper).

Eco-Friendly Recycled Plastic: PEPROLENE™

Produced through our proprietary recycling manufacturing process, PEPROLENE™ is an eco-friendly plastic designed for a sustainable future. While maintaining transparency comparable to PC (polycarbonate) and PMMA (acrylic), it offers exceptional alkali resistance surpassing PC, as well as superior hydrolysis resistance, surface scratch resistance (high wear resistance that keeps scratches less noticeable), high impact resistance, heat resistance, and chemical resistance.

In addition to being a recycled material, PEPROLENE™ is completely BPA-free, eliminating endocrine-disrupting chemicals. With its superior resistance to detergents and moisture, it is highly recommended for daily goods, especially water-contact applications.

We can manufacture high precision LSR O-Ring in various applications, multiple cavitation is available for high efficiency and low part cost.

A new interior design product that expresses the traditional Japanese craft 'kumiko' using modern materials. With patented technology, it achieves larger sizes, curved shapes, and lighter weight, and is being introduced to interior design markets both in Japan and overseas, including hotels, commercial facilities, brand shops, and offices.

We offer biomass plastic materials made with renewable resources such as plant-derived raw materials. Our lineup includes materials based on PP, PE, ABS, PA, PS and other resins, designed to increase biomass content while maintaining practical moldability and physical properties similar to conventional petroleum-based plastics. These materials can be applied to injection molding, extrusion, blow molding, inflation molding, vacuum forming and other processing methods. They are suitable for daily goods, packaging, consumer products, industrial parts and various other applications. For companies considering a shift to environmentally friendly materials, we support material selection based on product use, required properties and molding conditions.

A synchronous servo motor lineup with high torque density for a wide range of servo automation applications.

Our LLDPE (Linear Low-Density Polyethylene) granules are versatile thermoplastic polymer pellets known for their high tensile strength, exceptional flexibility, and superior puncture resistance. They feature a density of 0.91 to 0.94 g/cm³ and short chain branches.

■ Product Description

THEDVELON is a multi-layer metal bearing composed of a steel backing and a sintered layer with dispersed solid lubricants on the inner surface.
It is designed for medium to high load conditions and provides excellent wear resistance.

■ Features

◉ Uniformly dispersed solid lubricants ensure stable lubrication performance over a long service life.
◉ The sintered alloy layer provides excellent wear resistance.
◉ Compared to conventional steel bearings, it offers superior wear and anti-seizure performance, even under high load conditions.
◉ Capable of accommodating complex shapes through press-forming processes.
◉ Available in various sizes and configurations to meet specific application requirements.
◉ Additional oil impregnation can be applied after long-term use or secondary processing if needed.

■ Applications

◉ Plastic injection molding machines
◉ Press machines and plastic mold guide components
◉ Hydraulic presses

A high-performance control system featuring a powerful controller and multi-touch HMI for a wide range of injection molding machines.

Melamine cyanurate, also known as melamine cyanurate ester, is a highly efficient, halogen-free, environmentally friendly flame retardant containing nitrogen. It is a white fine powder that has the advantages of economic use, high efficiency, excellent electrical and mechanical properties, no discoloration, low smoke, and low corrosiveness. At the same time, it is low toxic, safe for users, compatible with the environment, and has good thermal stability, making it very suitable for material processing. Characteristics: MCA not only has a good synergistic effect with phosphorus based flame retardants, but also achieves excellent flame retardant effects when used in combination with phenolic compounds. This product has good flame retardant effect, low dosage, non-toxic, low smoke emission, good compatibility with nylon resin, minimal impact on mechanical properties, and is less prone to mold sticking, foaming, and frosting during processing. Usage: Widely used for flame retardancy in rubber, nylon 6, nylon 66, polyurethane, phenolic resin, epoxy resin, polyethylene resin, and acrylic acid.

We supply a full range of additives for silicone rubber, such as platinum curing agents, heat stabilizers and flame retardants.

This biomass compound, based on biomass polyamide, is lightweight and offers functional properties such as low friction and moderate rigidity.
PasCom®, for which sample distribution began in 2022, is being considered for a wide range of applications, from consumer goods to industrial and commercial uses.

The FS Series is a range of smoke suppressants developed for PVC products. Please visit our booth for detailed product information.

CHUN TAI Machinery, one of the leading Plastic Recycling Machine Manufacturers, offers extruder and plastic recycling machine to revolutionize your plastic processing and recycling operations.

Our state-of-the-art machines, including extruders and plastic recycling equipment, are meticulously crafted for the streamlined preprocessing and recycling of a diverse array of thermoplastics.

From HDPE, LDPE, LLDPE, PC, PP and PS to ABS, PET, and various engineering plastics, our technology empowers you to efficiently and sustainably manage a wide range of plastic materials.

Prototype with Production-Grade Resins via CNC Machining—No Mold Required

As high-performance resins become standard, are you facing these challenges?
• Target production grades are unavailable as stock blocks, making testing difficult.
• High costs make prototype molds impractical for functional validation.

IMP Block, powered by patented molding technology, is the answer.

What is IMP Block?
Our proprietary process prevents internal voids even in thick-walled injection moldings, converting diverse resins into machinable blocks. This enables precise functional testing via CNC machining using the exact grade planned for mass production—without tooling.

Three Key Advantages:

Lower Costs: Eliminate prototype tooling to test new materials with minimal upfront investment.

Shorter Lead Times: Skip mold fabrication entirely to accelerate design iterations.

Streamlined Evaluation: Turn specialty resins into machinable stock to speed up validation and customer proposals.

Visit Our Booth!
Inspect void-free block samples and precision-machined parts firsthand. Stop by to consult on custom grades and speeding up your projects!

TCN Dimple Thermal Spray Coating is a high-performance surface engineering technology uniquely developed by Mishima Kosan, combining a highly wear-resistant thermal spray coating with a finely engineered dimpled surface texture.

In addition to the outstanding durability of the thermal spray coating, the optimized dimple geometry improves contact conditions, contributing to enhanced conveying stability while reducing slippage and indentation marks. Particularly in metal sheet manufacturing processes, this technology helps extend roll service life, increase productivity, and maintain consistent product quality.

Mishima Kosan optimizes dimple patterns and surface specifications according to each customer's application and operating environment, providing a unique roll solution that achieves both longer service life and higher product quality.

We provide high-performance foamed plastic materials with lightweight and enhanced functional properties. Our solutions support various applications requiring advanced foaming technologies.

Vision LUXO is a world-class industrial LED magnifier (bench magnifier) series developed by Vision Engineering.

Features: Equipped with high-quality, low-distortion optical glass lenses and high-intensity, dimmable LED lighting that provides shadow-free, uniform illumination. Its smooth, robust spring-balanced arm allows you to effortlessly position and lock the magnifier anywhere you need it.

Applications: Ideal for a wide range of environments requiring bright, magnified close-up work and inspection, such as electronic component soldering, precision assembly, and quality assurance visual inspections.

Swing type Take-out Robot for connector parts used in AI data senter. Ultra-high speed !!

Open kneaders with volume from 5L to 5000L, fully constructed of SUS304 stainless steel.
Equipped with jacket for heating and cooling by steam and circulating water.
Available with sigma blades or Banbury-type blades, processed with hard chrome plating and 300-mesh buff polishing.
Two discharge options: bottom screw discharge and tilting discharge.
The shaft seal adopts combined structure of mechanical seal + gland packing, easy to replace with excellent sealing performance.

MULTICOR mass flow-rate feeding devices are used wherever large amounts of bulk solids need to be continuously established, controlled and fed.
They provide precise feeding according to the Coriolis principle.

 High accuracy +/- 0.5 % (typically)
 Continuous mass flow measurement according to the Coriolis principle
 Solution for accurate measurement of high throughput
 Rugged design
 Easily integration
 Dusttight housing

[Feature]
The performance is remarkable: The material stream with an accuracy of ±0.5%. Precise and very economical, whether it is used for dust, throughput and consumption measurement for in-plant inventory, polymer feeding in granulating plants.

[Configuration]
The bulk solids hit a rotating measuring wheel. Due to the centrifugal force, the bulk solid particles on the vane are moved outwards.
On the measuring wheel – due to the acceleration in the direction of the circumference – the bulk solids are subject to the Coriolis force.
This can be recorded as a measurable variable which is proportional to the gravimetric feed rate, even with changing bulk density or different grain size.

Depo Series are a newer Coating and Overlay method applying EDM (Electrical Discharge Machining) principle.

“Coating”Longer Service Life by Preventive Maintenance
Longer service lives of Mechanical Tools, Molds & Dies, and Tools to apply Coating layer of WC, TiC, Cr3C2, VC etc. that resists to wear, heat, seizing, corrosion, oxidation etc.
“Overlay”Necessary Part Repairing at On-site
Repairing mechanical parts, molds, dies, jigs, and tools that are worn, corroded, pin-holes, or machined error by Overlay.
Portable Depo Series may repair only to necessary part without dis-assembling large works.

Achieved full automation from arranging and supplying metal inserts into the mold to unloading after molding.

We leverage our expertise in polished molds and long-cycle molding to tackle the challenges associated with thick-walled, transparent, optical, and high-aesthetic-quality molding.
Japan Pla-Lens (JPL) specializes in resin products that demand a balance between visual appearance and internal quality, such as optical lenses, covers for lighting and sensors, and transparent thick-walled components.
For thick-walled molding, we fine-tune parameters—including mold temperature, holding pressure, gate sealing, and cooling time—to match the specific product geometry, thereby minimizing defects such as sink marks, waviness, voids, weld lines, and poor surface replication. By combining high-temperature mold/long-cycle molding (utilizing hydraulic molding machines) with advanced mold technologies—including mirror-finish processing—we can produce shapes that are difficult to achieve with standard high-cycle molding methods.

An ultrasonic polishing machine that handles everything from removing electrical discharge marks to achieving a mirror finish—all with a single unit. It can be used with a wide variety of materials, including ceramic grinding wheels, metal-bonded diamond tips, and wood chips combined with diamond paste.

Applications of ABS (Acrylonitrile‑Butadiene‑Styrene Copolymer)
ABS combines rigidity, toughness and hardness. It is easy for injection moulding and its surface can be easily painted or electroplated. However, it is vulnerable to organic solvents and has average weather resistance.
‑ Home‑appliance housings: casings for TV sets, washing machines, air conditioners and computer cases
‑ Automotive parts: automotive interior panels, instrument housings, steering‑wheel components
‑ Electronic digital products: keyboards, mice, charger shells
‑ Daily‑use goods: luggage shells, toys, office‑equipment housings
‑ Others: electroplatable plastic parts

The modular system BASIC M is a laser welding system for integration into industrial production plants. The BASIC Mʼs base configuration includes the Main Unit, optics, and laser.

CHAOXIN's bag making machines can be used as basic equipment for the production of a wide range of bags, including plastic bags, undershirt bags, garbage bags, and more. These machines are designed to automate the bag making process, thereby increasing efficiency and reducing labor costs.

GRS Certified PCR Recycled Resin
An eco-friendly recycled resin utilizing PCR (Post Consumer Recycled) materials. With GRS certification, we ensure the traceability of recycled materials and stable quality control throughout the recycling process.
By effectively utilizing post-consumer plastic resources, including recycled ABS derived from marine buoys, recycled PA6 derived from waste fishing nets, and recycled PA66 derived from automotive airbags, we provide high-quality recycled materials for sustainable applications.
Glass fiber reinforcement and various functional modifications can be customized according to application requirements. Our materials are suitable for a wide range of fields, including automotive parts, electrical & electronic components, industrial equipment, and other applications.

Usage:
The machine is designed for producing various of open-wide plastic containers, such as food trays, plastic trays, cosmetic trays , blister , clamshells , plates and other plastic related items .
Suitable Sheet:
PVC,PP,PS,OPS,PET,APET,PETG, CPET Etc
Structure Features:
1. Pressure And/Or Vacuum forming.
2.Up and down mold forming method, Servo plug assist on upper mold.
3.Clamp frame or plug assist with precise stroke adjustment on top and bottom former.
4.Servo motor feeding, feeding length can be step-less adjusted. High speed and accurate.
5.Upper & lower heater, three sections heating
6.Heater with intellectual temperature control system, automatic supply the heating individual heater control. Fast heating(3 min from 0-400 degree), it won’t be effected by outer voltage.8. Forming and cutting unit mold open and close controlled by servo motor, products automatically count.
7.Data memorization function can store 90 set of running data.
8.Stacking type:downward stacking.
9.Feeding width can be synchronously or independently adjusted in electrical way.
10.Oven will automatically push-out when the sheetis over heated, Air pressure not enough.
11.Automatic lubrication system.

Mantis OPTA is a high-performance optical 3D viewer (stereo microscope) featuring an ergonomic design, developed by Vision Engineering in the UK.

Features: Adopts an eyepiece-less design without traditional ocular lenses, enabling a natural, strain-free posture and stereoscopic vision (3D view) with both eyes. It significantly reduces eye fatigue and physical strain during long hours of work.

Applications: Supports switching between 4x and 6x magnifications. It is ideal for fine manual tasks and inspections requiring hand-eye coordination, such as electronic component soldering, precision visual inspections, and various handling operations.

Add Real-Time Visualization to Your Anton Paar MCR Series
Enhance your existing Anton Paar MCR Series rheometer with the CRYSTA polarization high-speed camera.
CRYSTA simultaneously captures the retardation distribution and optical axis orientation distribution of your sample during rheological measurements, providing dynamic visualization of material behavior.
Gain deeper insights into structural changes, relaxation behavior, phase transitions, and other dynamic phenomena that cannot be captured by rheological measurements alone.

The J 2-8 PU Hose is a high-performance suction and transport hose engineered for heavy-duty abrasive material handling. Featuring a premium Polyurethane (PU) wall integrated with an encapsulated copper-plated spring steel wire spiral, it delivers extraordinary wear resistance, excellent vacuum strength, and reliable static dissipation through spiral grounding.

This is a foreign material sorter designed specifically for recycled plastic.
It separates rubber-based foreign materials from waste plastic and shredder dust.
Since the sorting process utilizes differences in surface friction as the material moves over rotating rollers, it works regardless of differences in color or shape.

EVO Cam AURA is a high-performance digital microscope developed by Vision Engineering (UK).

Features: Built on high-resolution digital imaging and exceptional optical zoom, it offers high expandability, allowing you to customize lighting, stands, and control interfaces to suit specific inspection tasks and workpiece shapes.

Applications: Ideal for efficiently conducting high-definition screen sharing, accurate visual inspections, and simple measurements in diverse manufacturing and inspection environments, such as electronic components, precision machinery, and medical devices.

■ System Features:
1. Semi-Automatic Mixing & Dosing System for Peak Efficiency: Integrates mixing, cooling, and metering/conveying to significantly reduce manual labor.
2. High-Speed Uniform Mixing for Consistent Quality: Fast-mixing design ensures rapid, even dispersion and exceptional formula consistency.
3. Vertical Cooling Design to Shorten Cycle Times: Rapidly lowers material temperature post-mixing, accelerating cooling and optimizing line takt time.
4. Modular Configuration for High Investment Flexibility: Easily scalable to meet varying capacity demands, ideal for standard mass-production facilities.
5. Versatile Mixing Core Across Diverse Industries: Widely applied in plastics, food & pharma, electronic materials, and chemicals to drive high-efficiency production.

It is a new-generation smart metal detector developed using digital smart technology.
It can detect various metal contaminants mixed into raw materials and products.
It achieves complete digitalization and smart functionality of metal detection technology, and with its excellent performance and ease of operation
it can improve a company's production efficiency and help ensure product quality.

Product Examples

●PP Natural
-Original Material:Packaging films
- Applications:Gardening goods, amenities (injection molding)

●PP Black / Mixed Colors
-Original Materials:Gravure-printed films, ground runners
-Applications:General goods, industrial materials, building materials (injection molding)

We stably manufacture and supply high-quality recycled plastics tailored to our customers' specific requirements.

Our recycled plastics can be utilized across a wide range of applications, including:

- Automotive components
- Electrical and electronic components
- Household products
- Agricultural and horticultural materials
- Industrial materials
- Construction materials
- Packaging materials

By accurately reflecting our customers' requirements in our products, we provide high-quality recycled plastics with consistent quality and stable supply.

MET Min loss-in-weight feeder is used for continuous dosing or batching of powders in very small quantities.

 Gravimetric feeder for small quantities with dual shaft and vertical agitator
 Easy disassembly for cleaning and discharge unit replacement
 4-litre tank, negatively conical with bottom-reaching agitator for manual filling
 8-litre tank, conical with wall- and bottom-reaching agitator and lid with nozzles
 Optional protective housing to minimize environmental interference

[Feature]
The drive and weighing equipment are housed in a dust-proofed enclosure.
The one-piece discharge floor is made from high-quality plastic,ledge-free, and easy to clean.
The bottom-reaching vertical agitator is easy to disassemble and ensures a uniform filling level of the discharge units.

[Configuration]
The negatively conical 4-litre tank, equipped with a bottom-reaching agitator, is manually filled and used for small capacities.
The conical 8-litre tank, with a wall-reaching agitator, includes a lid and refill nozzle, suitable for larger capacities.
For smaller capacities, a protective housing is recommended to minimize external interference.

Simultaneously measures shear viscosity and extensional viscosity using dual measuring barrels. Delivers corrected, highly accurate shear viscosity data with outstanding reproducibility.

ECOVENT series boasts an exhaust cross-sectional area more than 100 times larger than conventional typical Gas vents. It includes to set on the runner-type ECO-WIND series and to set into cavity/core-type ECO-FLAT series, offering a variety of combinations to meet Gas issues.

Fluorine rubber (FKM): "king of rubber" with high temperature and oil resistance
Fluorinated rubber elastomers are also called "special forces" in the rubber industry. Unlike the above described PTFE and PFA, it is the best feature of FKM that has high elasticity of rubber and has excellent chemical resistance and heat resistance.
Main features:
Heat resistant: long term usage temperature reaches 200.degree. C. to 250C, and can withstand at 300.degree. C. in short term use temperature, and surpasses common nitrile rubber (NBR).
Oil resistance and chemical resistance: ideal for automotive engine room, showing high resistance to mineral oil, fuel oil, hydraulic oil, and many organic solvents.
Weatherproof: excellent resistance to ozone, ultraviolet rays, aging, and suitable for severe outdoor environments.

The Automatic UV Cap Layer Measurement system is the world’s first automated system for measuring the UV cap layer thickness of finished PC sheets on the production floor, eliminating the need for time consuming sample preparation or operator expertise.
The operator simply places the finished sheet on the unit with the UV layer facing down and clicks the measure button - the UV cap layer thickness is immediately displayed on the system screen along with the image

Static elimination, dust removal, and dust collection fully integrated. Two ionizers and the series' highest airflow of 5.5 m³/min powerfully remove even fine dust.

Compact All-Electric Production System:
Simple. Smart.
High-Precision, High-Efficiency Molding — Made More Accessible.

MULTIPLAS introduces a compact all-electric production system designed to meet the demands of modern molding operations for high productivity, precision, and energy efficiency. By integrating intelligent modular technologies with high-precision molding technologies, the system delivers stable molding quality and efficient automated production.

With a focus on reducing the barriers to equipment investment, MULTIPLAS enables simple, reliable, and high-value-added molding processes.

Efficiently conveys pellets from flexible intermediate bulk containers (FIBCs) by vacuum. Simply connect it to an existing conveying line—no power supply is required. Reduces material residue and streamlines material handling.

Our facility is equipped with vertical injection molding machines ranging from 20 to 75 tons of clamping force.
We also support reel-to-reel insert molding.

This material achieves both insulation and high thermal conductivity, and with a thermal conductivity of about 6 W/m·K, it can conduct heat not only in the plane direction but also vertically. Development examples include: stator sealing, reactor sealing, semiconductor relay sealing, SiC power device sealing, etc. It's good at adhering to metals, and can be adjusted for Ni, Al, Au, Cu, Ag, etc. It also shows strong adhesion to PI and PAI (copper wire coating).

This is a sister publication of the Rubber News.
It provides concise coverage of trends in rubber and elastomer products and markets by sector, new products and technologies, raw material trends, equipment and machinery, interviews, information on overseas companies, and statistics. It also features a wealth of essays (contributed articles).

Thermoplastic insert nuts designed for post-molding installation. Opposing-direction knurls on the outer surface provide high pull-out and torque resistance. The guide section ensures stable positioning during insertion and helps achieve straight, vertical installation. Suitable for heat, ultrasonic, and high-frequency insertion. Available in brass, aluminum alloy, and stainless steel.

Acetylene black, compared to conductive carbon black produced by the general furnace method, has advanced graphitization (graphitization) and developed graphene structures. Additionally, because it uses high-purity gas produced in-house as raw material, it has the following characteristics:

- High thermal conductivity
- High electrical conductivity
- High purity
- Electromagnetic wave absorption properties

These characteristics are used in the following industries:

- Shielding layers of high-pressure cables (semiconductor layers)
- Bladders used in rubber vulcanization for tires, etc.
- V-belts
- Electronic component trays
- Conductive gaskets
- Conductive rubber parts in contact with the ground surface of robots and components
- Rubber for static electricity countermeasures (tires, rollers)
- Static electricity countermeasure coatings
- Anti-corrosion coatings (mainly for ships)
- Thermostats
- Electromagnetic wave absorbing fillers

High stiffness high toughness replacing the metal by the plastic for lightening.

Greco in-house developed ISOPAK LFRT includes long glass fiber and long carbon fiber reinforced materials. The material presents excellent rigidity property, impact resistance, abrasion resistance and dimensional stability. It can be used to replace metal material of the industrial parts and efficiently lightening the weight. The injected product can reach nice gloss and smooth surfaces.

The length of ISOPAK LFRT pellets can be produced between 10mm to 25mm. It can be applied to the case of electrical instrument, car parts, machinery parts, exercise equipment gears, and IT equipment frame and/or housing.

Heat transfer film (HTF) is a decoration technology that uses heat and pressure to transfer designs from a film onto the surface of various substrates such as plastics, metals, wood, and glass. This process enables vivid colors, fine details, and durable finishes that resist wear and fading. HTF is widely applied to toys, stationery, household goods, packaging, and industrial components, enhancing product aesthetics and strengthening brand identity. One of its key advantages is design flexibility—patterns can be changed quickly, allowing manufacturers to adapt to market trends and customer preferences with minimal downtime. Because HTF is applied as a secondary process, it integrates easily into production lines without requiring complex modifications, improving efficiency and reducing costs. Overall, HTF combines versatility, efficiency, and high‑quality decoration, making it a preferred solution for industries seeking attractive, durable, and customizable surface finishes.

Heat transfer films are decorative films used to transfer pre-printed designs onto product surfaces using heat and pressure. They can be used for a wide range of products, including stationery, cosmetics, and everyday products.

This compact unit is designed to wash and compact used paper cups and other paper containers generated at restaurants and food service facilities.
The processed paper containers can then be sent for recycling and reused as raw material for paper production.
Its compact design makes it suitable for a wide range of locations, including restaurants, cafeterias, and event venues.

We adopt internationally high-quality mold steel, support custom production for single-layer & multi-layer specifications. Suitable for thermal-sensitive coating and protective layer coating applications. Die head temperature, width and flow rate can be customized as requested.

ISOTHANE SCF TPU: High-elasticity, low-density foam beads with up to 63% rebound and excellent -25°C cold resistance.
ISOTHANE ETPU offers a perfect combination of soft texture and high elasticity. Customizable in colors and particle sizes for lightweight application.

Key Features:
• High Rebound: Rebound rate up to 63%
• Low Density: 100–200 kg/m³
• Cold Resistance: Maintains elasticity even at -25°C
• Anti-Yellowing: Standard & non-yellowing grades available
• High Wear Resistance: Excellent abrasion resistance
• High Flexing Endurance: Bears up to 120,000 bends
• Low Compression Set: Over 90% recovery rate
• Eco-Friendly: Sustainable materials and processes

World-leading Küsters S-Roll calender technology. Delivering high-precision, highly uniform processing for nonwovens, textiles, and other advanced materials, taking product quality to the next level.

DIOSHY-NL Series. High-bond TPE for overmolding.
Delivers excellent bonding strength to engineering plastics, including PA6, PA66, PA12, and glass fiber-reinforced (GFR) specifications.
With high thermal stability that prevents degradation, this material ensures stable mass production and reduces waste.

Introducing “J-FLEX,” the JSW Group’s brand for film and sheet processing equipment. By combining the strengths of JSW, GM ENGINEERING, and SMPlatek, we flexibly and precisely address a wide range of customer requirements and deliver optimal solutions tailored to each customer.

Piperazine pyrophosphate is a halogen-free, intumescent flame retardant for polyolefins that uses phosphorus and nitrogen as flame-retardant elements. It is specifically designed for polypropylene and polyethylene products.

Advantages:
1) High phosphorus content for excellent flame retardancy
2) Achieves UL 94 V-0 flame retardancy with extremely low loading levels
3) Excellent processing properties
4) Good mechanical properties
5) Low smoke and low toxicity
6) Halogen-free and environmentally friendly

High-precision injection mold for electronic connectors and terminals.
Features modular inserts and 5-axis machining to ensure micron-level tolerance,
perfect dimensional stability, and smooth demolding.
Supporting projects from low-volume trials to mass production.

Dedicated non return valve for medical use made by LSR. The slits are produced inside the mold without secondary cutting work.

High-performance cooling mixer that rapidly and uniformly cools materials after mixing, ensuring stable quality and efficient production. Suitable for plastics, chemicals, and various industrial applications.

As the filter rotates, the resin is continuously filtered through a clean filter element.
In addition, a small amount of the filtered resin is drawn off and backwashed from the outlet side to the inlet side of the screen at a pressure of approximately 30 to 80 bar.
This results in excellent self-cleaning performance.

We offer both oil-extended and non-oil-extended E-SBR grades, including widely used grades such as 1502 and 1723, with a broad lineup tailored to various applications.

The "KCL Series" is a temperature controlling equipment that employs a vacuum circulation system, which draws the medium into the mold’s cooling circuits to ensure the pressure remains below atmospheric pressure (vacuum) at all times, while conventional mold temperature controllers pump medium at pressures higher than atmospheric pressure through the cooling circuits inside the mold.
* * * * * *
･No risk of water leaks.
･It enables bold mold designs that would normally be considered impossible.
･It also makes it possible to route cooling water channels through all areas requiring cooling, greatly expanding the design freedom for molds.
･Media: Water (up to 60°C), oil (up to 100°C)

A High-Speed Polarization Camera That Reveals Invisible Stress Through Proprietary Polarization Technology.
The CRYSTA Series is the world’s only polarization high-speed camera capable of visualizing the dynamic propagation of stress and molecular orientation within transparent materials.
By capturing these phenomena in real time, CRYSTA provides unprecedented insight into the internal behavior and structural dynamics of transparent materials.

Eliminate mold costs and accelerate lead times with precision plastic machining.

Detects Incomplete Mold Clamping for Enhanced Safety. Prevent human error in mold mounting plate thickness settings. Eliminate the need for manual clamp verification.

•Dual Function in One Unit-Dual Function Within One Screw, powered By Single Motor. Significant Energy Savings
Integrates two essential processes into one single machine, simplifying your workflow while saving valuable space, labor, and energy.
•High Efficiency with Lower Cost-Effectively handles materials with over 50% moisture content from the washing line. The squeezing stage reduces the moisture to just 1–3% before the material enters the extrusion section, significantly improving extrusion performance — and after extrusion and pelletizing, the final pellets come out completely dry.
•Optimized for Fluffy Materials-Designed for LDPE/HDPE films, Agricultural films, and soft packaging waste.

The “Mixer That Doesn't Mix” Freely combine seven materials while reducing material costs, waste, and changeover work with the MazeCon AB-07.
The MazeCon AB-07 is a multi-material mixing machine that can simultaneously meter and mix up to seven different materials by weight.

By utilizing its seven material units to actively incorporate lower-cost materials, recycled materials, and off-grade materials, the AB-07 helps reduce raw material costs.
The newly developed XY System enables automatic feeding of purge material, automatic material discharge, and prevention of material spillage.

By simplifying material changeovers and cleaning operations that tend to increase with multi-material mixing, the AB-07 reduces material waste and supports stable production.

Injection molds and components manufactured by our company.
A wide variety of product samples—ranging from low-hardness elastomers and PVC to high-hardness engineering plastics—molded using our company's molds.
Information on the services we provide.
Proposals for cost reduction and shorter lead times.

A multilayer PP sheet with an integrated barrier layer that blocks oxygen far more effectively than single-layer PP, extending shelf life for up to 12 months, and available in a wide range of colors. Used to manufacture food trays for a variety of applications requiring long-term storage — including retort, room-temperature pudding and jelly, pet food, baby food, and aseptic rice.

3DFovi is a simple 3D viewer that delivers both on-the-floor ease of use and a remarkably low price. It works just like Word or Excel, so anyone can view and measure 3D data intuitively — no CAD expertise and no CAD operator required. It opens native data from CATIA, NX, Creo, SOLIDWORKS and Inventor, plus intermediate formats and 2D drawings including STEP, Parasolid, IGES, STL, DXF, DWG, HPGL and CATDrawing, consolidating every customer's CAD format into one tool. A single click instantly calculates the maximum outer dimensions, volume and mass, completing material estimation, moulding machine selection, packaging size review and incoming inspection right on site. At 47,850 yen for the first year and 18,700 yen for renewal (tax included), the low running cost makes it ideal for installing on multiple shop-floor PCs. Not a high-end design tool, but a confirmation tool for the shop floor — 3DFovi is your first step into 3D data.

Gas-venting bottle featuring the D17 vent. We offer solutions to help prevent container swelling, paneling, and liquid leakage.

In this HP type (hydraulic-pneumatic machine needle shut-off nozzle), an integrated actuator (pneumatically and water-cooled/hydraulically driven) drives a needle mounted coaxially with the nozzle by a link mechanism. Molten resin is reliably shut off at the nozzle orifice. However, the design ensures safety by automatically opening the nozzle and opening the flow path when excessive pressure is applied. The application of tip extension modules, filters, and gas-assisted processes broaden the range of applications for the shut-off nozzle.
This nozzle can be independently controlled to open and close the nozzle regardless of fluctuations in resin pressure. It can be used for special applications such as physical foaming (Mu-cell).
The compact design and easy-to-replace parts ensure long-term use.
As an option, a resin filter and mixing element can be added to our shut-off nozzles.

Even without drawings, we precisely measure actual parts to create drawings and 3D data. Leveraging our extensive experience, we can reproduce and manufacture existing components.

We provide environmentally friendly biodegradable plastic materials to support the development of sustainable plastic products and reduce environmental impact.

The CENTERWAVE 6000 is a groundbreaking innovative key technology during the extrusion of big tubes. One or several transceivers, arranged around the circumference of a tube, for continuously sending and receiving frequency modulated millimeter waves measure contactless and µm-precisely the diameter, ovality and wall thickness of big plastic tubes during the extrusion process – without knowledge of material properties and without coupling mediums.

PET Natural – Product Example & Features

●PET Natural
-Original Materials:Food packaging films, optical films, preforms
-Applications:Staple fibers, filament fibers, sheets

●Features
- Polymer filters installed in the recycling equipment**
- Contract recycling processing for optical films is available**
- Continuous removal of contaminants enables the production of high-quality pellets with a filtration level of 10 μm
-Stable production through 24-hour continuous operation**
-High-quality recycled raw materials produced through our contract recycling processing**

The Right-Sized Mixer for Small Extruders. Compact and affordable, with only the essential functions. No compromise on mixing accuracy.

Newly developed for small extruders, this compact and cost-effective mixing machine provides the essential functions required for precise material mixing.
With a maximum throughput of 30 kg/h, the machine achieves a compact design by limiting the number of materials that can be mixed to three.

The extrusion output control and take-up speed control functions featured in conventional MazeCon models have been omitted, allowing the machine to focus on the functions that are essential for material mixing and making it more accessible for a wider range of applications.
Despite its simplified design, the machine maintains a level of mixing accuracy comparable to that of conventional MazeCon models.

Visit our exhibition booth to see the prototype in action.

This is a device that mechanically removes burrs by using the cooling power of liquid carbon dioxide or liquid nitrogen and the low-temperature brittleness of molded parts. The method involves freezing the molded product so that the weakened parts can be mechanically broken and removed. For example, rubber gradually loses its elasticity as the temperature drops—hardening → becoming brittle → crystallizing—and below a certain brittle temperature, even slight deformation can break it and remove it. With rapid cooling using liquid carbon dioxide or liquid nitrogen, molded parts develop a hardness difference between the burrs and the main body of the product. The quickly hardened burrs become brittle and can be easily removed with external force in a short time.

Lately, are you struggling with manual burr removal due to labor shortages and rising personnel costs? We can propose an automated burr removal solution for your needs.

BBS has developed an automation solution to enable manufacturers to respond the increasing numbers of disposable laboratory parts such as reaction vessels, cuvettes, micro tubes, culture tubes, spin columns, etc. in a perfect way.

Specialized Screw & Barrel Engineering
•Short-Stroke, Variable-Diameter Screw Design: Specially engineered with an optimized compression ratio to achieve homogeneous plasticization and intensive compounding within a short mechanical distance.
•High-Torque Gearbox: Despite its compact footprint, it is equipped with a high-torque heavy-duty reduction gearbox that minimizes energy consumption while maximizing operational stability.

Streamlined Post-Processing & Material Versatility
•Pneumatic Cooling & Conveying: Cut pellets are immediately quenched and transported via an integrated air-blowing system. This waterless, space-saving design eliminates the need for large cooling troughs and is ideal for processing HDPE, LDPE, and LLDPE.
•Operational Flexibility: Supports both inline and offline (standalone batch) pelletizing configurations to adapt to your factory's workflow.
Integrated Safety Architecture This PIRANHA series has all safety and running parameters in the PLC control system, and any machine malfunction would be alarmed to enable operator intervention.
Evaluate Before You Invest.
✔ Superior pellet quality
✔ Higher production capacity
✔ Lower energy consumption (kWh/kg)

[Scheduled for Release in 2027] Advance Exhibition Announcement
* * * * * *
･Reduces scale-forming factors in makeup water by half. Suppresses the accumulation of corrosive factors and supports stable equipment operation
･Magnetic design allows for easy installation on the side of the chiller
･Compact design ideal even for small units. Can be installed on models such as the KCWS and KCAS
･Cartridges feature one-touch attachment and removal, significantly reducing the effort required for replacement and maintenance

Our High-density polyethylene granules are small, high-density polyethylene plastic pellets used as raw material to manufacture rigid products like bottles, pipes, and containers. They feature a high strength-to-density ratio, excellent chemical resistance, and a melting point around 130°C.

We are exhibiting our new line of air-cooled chillers and temperature control units—the "KCAS Series"—which come standard with inverters. These models offer significantly improved energy efficiency and cooling capacity.
* * * * * *
･Comes standard with an inverter-equipped refrigeration unit, delivering high energy efficiency and performance
･No cooling water piping or cooling towers required
･Compact design suitable for use in development and testing labs
･Supports a wide range of IoT interfaces

Integrating water-based coating with two-layer co-extrusion lamination, this unit is engineered for premium In-Mold Labeling (IML) paper production. It achieves complex multi-layer compounding in a single line, delivering superior moisture resistance, scratch durability, and high adhesion to ensure seamless bonding and vivid graphics during in-mold injection, significantly boosting production efficiency.

1. Professional 38mm/45mm/3025/2925 PE Cap, Gallon Cap

2. Special color shampoo and body wash bottles

3. PET Preform

This is an insulating material/molded product with excellent voltage resistance, tracking resistance, and mechanical properties, with over 50 years of delivery experience. It’s widely used in heavy electrical industries for power distribution equipment, circuit breakers, insulators, support insulators, spacers, and more. By taking advantage of its molding flexibility, we offer everything from large to small sizes, including standard products. Since we handle everything from material production to molding domestically in Japan, we can meet all kinds of needs.

Summary
This is a polystyrene biaxially stretched sheet. It makes full use of the transparency, rigidity and food safety of polystyrene, and improves its mechanical strength through biaxial stretching. Mainly as a food container is widely used.

Features
Transparent container made by thermoforming process. Mainly as a food container is widely used. The finished product is colorless, transparent and shiny, and can clearly present the food inside, which is conducive to improving the value of the product. In addition, the rigidity of the sheet can be effectively utilized to make the container thinner and lighter.
Use

Lid, food packaging bag, food tray, etc

Energy‑efficient forming machine/ Power Consumption Visualization / Multi‑Industry Applications

Layer Injection Technology incorporating WOOJIN PLAIMM's proprietary Super-Foam technology

High-rigidity design of machine bed:
Integral casting design combined with high-tension steel plate structure offers steady and low noise operation.

Servo chain feeding system:
Japanese chain operated by servo-controller ensures exact precision of high-speed feeding.
Precision Temperature Control System:
Independent temperature control with respective setting for each temperature zone, uses SSR with PID calculus for controlling the temperature, combined with high-speed transmission and control, offers precision adjustment and is convenience for elevated yield.
Upper and Lower Heating Oven:
German made ceramic heater, temperature accuracy can be controlled very well.
Automatic Lubrication System:
Automatic oil feed for slide parts, eliminating any failure resulting from insufficient lubrication.

Applicable to Materials:
PLA.(r)PET.C-PET.PS.PP.PS.OPS.EPS
Applicable to Products:
Cup lids
Clamshell containers, meat tray
Candy/ Cookies packaging trays
Food containers
Medical packaging
Industrial packaging
Blister packaging
Lunch boxes/ salad containers
Egg cartons

Multi-Color Energy-Saving Electric Series
- An injection molding machine that controls all operations with servo motors and
enables high-speed production of complex molded products

The "KCO-i" is a thermal fluid (oil) temperature controlling equipment that delivers high cooling capacity through its dual-circuit temperature control system and achieves high mold cooling efficiency thanks to its high-pressure pump.
It is recommended for temperature control of die-casting molds and press-forming molds (magnesium forming).
* * * * * *
･Two 30 kW heating systems integrated into a compact housing
･Standard media flow rate display function for monitoring and operation directly on the controller
･Supports a wide range of communication standards (MODBUS, SPI)

Advanced 2-Material 3-Layer Co-Extrusion: Features double-resin co-extrusion technology that perfectly encapsulates a high-content recycled core with virgin outer layers, maintaining structural integrity without compromising quality.
Empowering ESG & Sustainability: Maximizes the utilization of PCR/PIR (post-consumer/post-industrial recycled) plastics, reducing reliance on virgin materials and helping businesses achieve critical sustainability goals.
Carbon Footprint & Cost Reduction: Efficiently consumes recycled resin in the middle layer to significantly decrease raw material expenses while lowering carbon emissions throughout the product lifecycle.
Optimized Appearance & Physical Strength: The virgin outer layers completely seal the recycled core, ensuring a clean visual finish, strong heat sealing, and high-performance cushioning protection.
High-Efficiency & Stable Production: Equipped with precision temperature control and advanced co-extrusion dies, delivering stable continuous output with flexible material blending options for eco-friendly mass production.

This optical sorter can distinguish 16.77 million colors and features user-friendly operation enabled by a highlighting function. In addition to standard color sorting, optional features such as an infrared camera for foreign material removal and a feature recognition program can also be integrated.

STK SHOT MEDIA is a plastic media developed for high-quality burr removal in ultra-shot processes. It needs to withstand the ultra-low temperatures of nitrogen gas and the high-speed impact when hitting the target. It's also a high-quality media with minimal variations in shape and size.

This system provides a service that facilitates online matching and manages the entire transaction process, connecting buyers seeking recycled materials with sellers looking to circulate waste materials as recycled resources.
It is being jointly developed by Hitachi High-Tech and Hitachi, leveraging Hitachi High-Tech’s long-standing expertise in plastic materials and its core measurement and analysis technologies, alongside AI technology developed from Hitachi’s Materials Informatics (MI) capabilities and a proprietary experimental database on recycled plastics.

One-stop support from product development to mass production, covering product design, molds, molding, assembly, and inspection.

This is a microalgae cultivation system that utilizes a PE bag as the culture vessel and does not employ stirring blades for circulating the culture medium.

PY-6207MA is a halogen-free, environmentally friendly flame-retardant masterbatch that uses phosphorus and nitrogen as flame-retardant elements, specifically designed for use in polyether-based TPU products. It achieves a flame-retardant rating of UL94 V-0, and VW-1 for cables.
It also delivers excellent flame-retardant performance in foamed PU. In the hot-melt adhesive sector, it provides outstanding flame-retardant performance at lower loading levels while having minimal impact on the physical properties of the adhesive.

Our system reads the numbers indicated by rotating date marks automatically — simply point a camera at them. It recognizes up to six marks simultaneously and displays the results in about 0.5 seconds per reading. Just enter the part number and lot number, press

We will demonstrate encapsulation molding to secure magnets inside motor component parts.
This time, we have automated the process from material handling to molding as an automatic molding system using transfer molding with articulated robots.
The all-electric transfer molding machine achieves more stable resin filling compared to conventional hydraulic-driven machines.
This contributes to improved stability during motor rotation. Additionally, it excels in the reproducibility of molding conditions, achieving stable molding quality.

While recycled plastics often suffer from inconsistent quality, we supply high-quality recycled plastics with minimal lot-to-lot variation. We can also develop polypropylene (PP) materials tailored to your specifications that comply with proposed End-of-Life Vehicle (ELV) regulations. Furthermore, we are now expanding our offerings to include materials sourced from overseas.

In addition, we provide contract quality analysis and evaluation systems (featuring quality visualization software) for molding materials. These services quantify molding quality by utilizing in-process sensing data—such as pressure and temperature—to extract key characteristics. They serve as valuable tools for supporting material selection and optimizing material usage in your operations.

r-PET

We specialize in the recycling and processing of post-consumer PET bottles. Our advanced workflow transforms discarded bottles into high-value resources:
• Crushing & Purification: Used PET bottles crushed into flakes and thoroughly purified to eliminate impurities.
• Sorting: We utilize advanced German TOMRA's NIR machine sorting technology to precisely remove caps, labels, and other impurities, significantly enhancing the purity and value of the final product.
• Customization: Depending on customer specifications, these high-quality flakes can be further granulated into pellets.

Versatile Applications
The upgraded material is ideal for a wide range of applications, including textiles, packaging materials(films), and strapping.

Available Colors
To meet diverse manufacturing needs, our r-PET products are available in:
• Transparent
• Light blue
• Green
• Mix color

Certifications & Compliance
Our commitment to quality and sustainability is backed by international standards:
• Certified: GRS, FDA, ISO
• In Progress: RecyClass (Application pending)

UV-360 is a very low volatile ultraviolet light absorber (UVA) of the hydroxyphenyl benzotriazole class,
imparting outstanding light stability to a variety of polymers, such as PC, PA, PET, PMMA ETC.

Everplast PVC & WPC compounding extrusion systems deliver high precision, exceptional output, and uniform pelletizing.

Everplast delivers robust, high-performance, and reliable turnkey solutions tailored to meet the evolving demands of modern polymer processors, compounding specialists, and high-capacity recycling facilities. Our steadfast commitment to material science, mechanical precision, and technological innovation ensures that every compounding extrusion line we manufacture maximizes throughput, optimizes energy efficiency, and delivers superior, uniform pellet quality across diverse industrial sectors.

Challenges Solved
In high-mix production environments, managing box inventories and preventing manual labeling errors present constant challenges.
Furthermore, reliance on manual labor acts as a bottleneck to productivity gains while introducing potential workplace safety risks.

Features
An advanced automation solution integrating carton printing with palletizer technology.
Leveraging technology developed in our take-out robots, the system reorients the box mid-air to print on all four side surfaces.

Key Benefits

Process Automation: Seamlessly automates the entire sequence from packaging and printing to palletizing,
achieving fully unattended operation.

Inventory Reduction & Error Prevention: Real-time printing eliminates redundant box stock while preventing human errors.

Flexibility for High-Mix Production: On-demand printing allows immediate adaptation to high-mix, low-volume production.

Higher Productivity & Shorter Lead Times: Significantly enhances operational efficiency,
contributing to reduced lead times and boosted productivity.

Industry First! Achieves Extended Lifespan for Deep Hole Molding Dies.
Maintaining the benefits of PVD coating that can be processed at temperatures below 500℃, we have enabled the creation of ceramic protective films on the inner surfaces of deep holes. This significantly extends the lifespan of deep hole dies and deep hole components where inner surface wear progresses.

Key features:
Achieving PVD Coating for Inner Surfaces of Deep Holes
- We can create a hard ceramic protective film (such as TiN or TiAlN) on the inner surface of deep holes with an L/D ratio of approximately 5, which is difficult with general PVD coating.
- Even on the inner surfaces of deep holes, it demonstrates high hardness and excellent adhesion comparable to general ceramic protective films.
- Significantly extended lifespan can be expected for molds that form on the inner surfaces of deep holes and machine parts that slide on the inner surfaces of deep holes.

Lineup:
diXis-TiN, diXis-TiCN, diXis-TiAlN, diXis-CrN, diXis-Acro

1.various pipe tooling:
A Multi-forms oftelecom multi-hole tube tooling
The tooling oflarge aperture PE and PVC tube for water supplyand bailing.
A The sandwich layer foams tuber tooling. Foam the spiral tube tooling and hit the empty spiral tube tooling.
The coal aas and natural gas sending tube tooling ,Compound and multi-layerlytube tooling.
A PE carbon spiral tube tooling and silicon-core tube tooling,Pp-R pipe tooling.
Special project pipetooling: C-PVC,PP,PC,PS ,PA,ABS,ASA, PET,EPDM,etc.
2.Various kinds ofseries and specs plastic doors and windows profile tooling
3.PVC low-foam andwood-plastics(WPC) co-extrusion tooling.
4.Various wiring ducts,wire clip andantenna cap tooling.
5.PVC fence, wall qutter, handrail, Sidings of wall decoration tooling.
6.Multicolor co-extrusion tooling, hard and soft co-extrusion tooling, mix materials co-extrusion tooling and multi-cavity tooling
7.Development of design ofthe special extrusion tooling.

Overview
Developed as a dedicated stripping unit for coated rigid plastics such as automotive bumpers (PP) and household appliance housings (ABS/PS), this unit effectively removes sintered coatings, printing inks and other adhered substances, providing pre-treatment support for the subsequent production of recycled pellets with relatively high purity.

Applicable Lines
• ELV dismantling plastics recycling line
• WEEE (Waste Electrical and Electronic Equipment) recycling line
Key Advantages
■ Enhanced value of recycled material: after stripping, the plastic pellets have a uniform color and can meet the requirements of applications such as paint-free and light-colored products;
■ Cost and efficiency benefits: helps reduce detergent and power consumption in downstream washing processes;
■ Environmental compliance: paint residue generated during stripping can be collected and handed over to qualified disposal companies, reducing the amount of solid waste generated;
■Strong process compatibility: can be smoothly interfaced with downstream processes such as electrostatic separation, material sorting and brine sink-float separation, improving sorting accuracy.

Building on the previous FORWARD ED-6 model, the new system now includes Line Monitoring, Production Report Monitoring, Maintenance Monitoring, and an integrated Temperature Monitoring screen as standard features.

It can also be easily connected to a factory-wide server and other equipment via a network, enabling streamlined system control and data logging.

Decomposes volatile gases generated during processes such as resin pellet drying, helping to improve the working environment in molding plants.
Breaks down VOCs to help keep the surrounding air clean.

Two major sectors: piece by piece and high-efficiency bag-on-roll systems.

For piece by piece, we offer versatile, high-performance solutions for a wide range of applications, including T-shirt(vest)bags,flat bags,garment bags, and heavy-duty industrial film sealing/cutting.

For bag-on-roll production, Lung Meng sets the benchmark with its innovative modular design. Manufacturers can configure production lines to match specific product requirements while maintaining the flexibility to respond to changing market demands.

For more than 20 years, our bags-on-roll technology has earned worldwide recognition. Our system also offers exceptional versatility by integrating multiple inline processes, including draw-string bag production, wave-top (S-cut),embossing, automatic labeling, enabling manufacturers to produce a wide variety of value-added products on a single platform.

Lung Meng do more than supply machinery, we work closely with customers to develop customized, flexible and future-ready production solutions that maximize efficiency, productivity, and long-term competitiveness.

“ROBOT-EYE SX-210”: A New-Generation Mold Monitoring System
This system enables both mold protection and product inspection within a single molding cycle, improving operational efficiency through remote operation.

LIZHU 60tons Low Base Rotary Vertical Injection Molding Machine is designed for high-precision insert molding and automated production. Its ergonomic low working height improves operation convenience, while the high-precision rotary table ensures fast and stable mold switching. With servo energy-saving technology and precise injection control, it provides efficient and reliable solutions for electronic connectors, automotive components, and precision insert molding applications.

Douyin followers: 86,578+ | Highest single-video exposure: 1,000,000+
WeChat Channels followers: 68,669+ | Total video exposure: over 32 million
Over 100 short video accounts in operation
Keeping pace with the era of short-video traffic, Plastic Industry operates multiple professional video production teams to help enterprises create creative short videos and provide one-stop account management services, including content creation, scriptwriting, filming, editing, and operations.
We also offer in-depth factory visits and enterprise interviews, bringing plastics machinery companies directly to end users through authentic on-site storytelling.
With visually engaging content, we showcase corporate culture and manufacturing strength, helping brands quickly gain visibility across platforms such as Douyin and WeChat Channels. Our continuously published engaging content attracts a large and targeted audience within the plastics industry, delivering greater traffic and exposure for our clients.
Our mission:
Increase visibility for plastics enterprises, enhance brand influence, reduce operational costs, and capture the growth opportunities of the short-video economy.

CDAS-1000 is a pretreatment device that can perform degradation of materials in a short period of time, such as 1 to 2 days, and the gases generated during the degradation process and the degradation on the material surface can be analyzed with other instruments.

"G-Twoone Mini" is a semi-automatic plastic gate cutting machine designed for plastic injection molding component factories to perform gate cutting operations with precision, safety, and stable quality. Operators simply set the workpiece and close the cover, and the intelligent sensor system automatically detects it to start cutting. It reduces operator fatigue, improves production speed, and minimizes errors and defective products caused by manual cutting.

Nippon Paper's next-generation composite harnesses wood-derived CNF to combine high strength, lightweight performance, and recyclability, with growing adoption in mobility applications.

A low-pressure-drop mixing nozzle that efficiently blends resin and helps reduce color unevenness when using masterbatch.

Advanced Inline AC Coating System: Equipped with an inline Anchor Coating (Primer) unit. By applying a specialized primer coating onto substrates like OPP, it creates a robust molecular bridge that significantly enhances bonding strength between the substrate and the LLDPE extrusion layer, achieving exceptional peel strength.
Wide Material Compatibility: Seamlessly processes film-to-film and film-to-foil laminations (BOPP, PET, CPP, LLDPE, and Aluminum Foil) to meet high standards for barrier properties, freshness, and package appearance.
Tailored for Food Packaging: Ideal for manufacturing food bags, high-barrier pouches, retort bags, and automated packaging films, ensuring hygienic, safe, and stable high-speed production.

Insecticide and anti-rodent masterbatch protecting agriculture, packaging, cables and pipes from insects and rodents.

HX Nitro Compact Industrial Inkjet Printer
A low-cost model designed for small-batch production across various manufacturing lines.
*Special exhibition pricing available.

Features
Cost Savings: Eliminates the need for expensive annual maintenance contracts; users can perform maintenance themselves.
Ease of Use: Create messages using a smartphone, tablet, or PC.
Clean Work Environment: Cartridge-based system prevents ink spills and messes.
Lightweight & Compact: Space-saving design takes up minimal room on the production line.

ViviOn™ CBC is a next-generation cyclic block copolymer that combines outstanding heat resistance, high transparency, low water absorption, and high purity.
With excellent dimensional stability and low outgassing characteristics, it is widely used in high-performance, value-added applications such as medical devices, optics, electronics, and semiconductors.

We propose “toyo-totsu,” an environmentally friendly, soft-touch product for interior resin components
that enables a urethane-free, adhesive-free, easy-to-disassemble, and mono-material design.
In addition to automotive parts, it can also be used for residential equipment and furniture, including flooring, handrails, and office chairs.

In sheet extrusion molding, we produce sheet blanks for vacuum forming in-house. The main materials are PP and A-PET, and we also handle PS in some cases. Additionally, for environmentally friendly materials, we also offer our own biomass A-PET sheet blanks.

Based on the experience and track record of a small-to-medium-sized enterprise specializing in high-mix,low-volume production and performing over 3,000 changeover purging operations annually,Tomiclean is a professional-grade purging compound that has been continuously evolving for 20 years, accumulating know-how along the way.

No labels required. A next-generation PET bottle that uses microstructures to create colors and text.

This device uses the cavitation effect created by mixing high-pressure water and air to clean scale and dirt from the water pipes inside molds.
* * * * * *
･An environmentally friendly product capable of cleaning without the use of chemicals
･Equipped with a variety of functions, including a timer operation feature, selectable cleaning modes, and the ability to set cleaning conditions for each specific mold
･Allows users to check post-cleaning flow rates and cleaning history on the controller screen (also supports external output)
･Equipped with casters for easy mobility, enabling cleaning operations in any location

LITHENE™ is a liquid polybutadiene that combines high reactivity with excellent flexibility. It helps enhance the performance of adhesives and sealants while offering a wide range of formulation possibilities.

The raw materials for nickel based alloy powder and HIP powder metallurgy materials are self-made. We have our own raw material smelting and heat treatment furnaces.
Based on the self-manufactured alloy raw materials, Bloom can offer the barrels, liners , screw elements and shafts for the parallel twin screw extruders. They can be used in the super wear and corrosion condition. Especially for acid condition application.

Specilized for 2~4 station Lacquring Machine for PVC & TPO synthetic leather of automotive industry. Gravure Printing Machine upto 8 colors for Rigid & Soft PVC film.

Biodegradable PLA foam molded products offering lightweight, sustainable alternatives for packaging and green applications.

Exhibiting a demonstration that visualizes power and energy consumption while delivering real-time, plant-wide operation tracking powered by our in-house developed MCM IoT system.

High-performance PEEK materials including granules, fine powders, profiles, and machined parts for demanding applications.

Products:Butyl Rubber (IIR), Chlorinated/Brominated Halobutyl Rubber (CIIR/BIIR)

Feature:World-class air tightness, heat & chemical resistance, sound absorption & vibration damping

Main Purpose:Tire inner liners, automotive/construction waterproofing & damping sheets, medical stoppers, pharmaceutical gaskets

Reliability:Proven track record with major global tire manufacturers and medical sector clients

IWAKI INDUSTRY's vacuum press molding machines are hydraulic presses designed to perform the molding of rubber and other materials within a vacuum chamber. By eliminating product defects such as air bubbles caused by trapped air or gas, these machines ensure high-quality, stable, and consistent product manufacturing. Furthermore, equipping the heating plates inside the chamber helps reduce heat dissipation loss, contributing to higher thermal efficiency.

Self-Weight Clamping Low-Profile Vertical Energy-Saving Series
- Low-profile vertical injection molding machine that saves energy through a self-weight
clamping system

Exhibiting high-precision PEEK resin gears developed for humanoid robots. Showcasing a metal-replacement solution that balances lightweight design with high strength.

Our High-Quality r-HDPE Recycling Process

We specialize in processing of post-consumer HDPE bottles, including everyday household packaging such as shampoo, body wash, and motor oil bottles.
Our advanced processing workflow ensures premium quality from start to finish:
• Color Sorting & Processing: Collected bottles undergo precise color sorting, followed by thorough washing and crushing into clean flakes.
• Pelletization: These high-purity flakes can be further processed into premium pellets based on your requirements.

Versatile Applications & Circular Economy
Our recycled HDPE is ideal for a wide range of industrial and commercial applications, including pallets and piping materials. It can even be blow-molded back into bottles, successfully achieving a true "bottle-to-bottle" closed-loop premium cycle.

Available Colors
To meet diverse manufacturing needs, our r-HDPE products are available in:
• Natural
• White
• Black

Certifications
• Certified: GRS, FDA, ISO
• In Progress: RecyClass (Application pending)

Let’s Innovate Together
Have specific requirements or custom ideas? We welcome you to contact us to discuss how we can tailor our solutions to your business needs.

We provide contract manufacturing services for film products. At the exhibition venue, we will showcase our manufacturing technologies, facilities, and a wide range of production examples. Please feel free to talk to our staff about any product, specification, or feature you may be looking for.

Baoxinglong anti-scratch nano calcium carbonate is high-grade functional filler with particle size ranging from 50 to 80 nanometers. After professional surface activation treatment, it boasts excellent compatibility with rubber, PVC, TPR and other polymer materials. It significantly enhances scratch resistance, surface gloss and structural rigidity of finished plastic and rubber products, widely used in shoe materials, profiles and plastic parts.

Type TSN is a spring-actuated needle-type shut-off nozzle used for molding thermoplastic resins, especially low-viscosity resins such as PA, PPS, PE, POM, and PP.
The nozzle is opened by injection pressure and closed again by spring force. The needle moves coaxially with the body and is normally held in the closed position by spring force. In the initial position, the nozzle orifice is normally closed. Rising molten resin pressure acts on the surface of the needle, causing it to retract at 200 bar and the nozzle to open. As the molten resin pressure decreases (≤ 80 bar), the needle is propelled forward by spring force and the nozzle is closed.
The nozzle can be backed up while the resin is being metered, thus reducing the cycle time per shot.
And it is possible to suppress the transition of heat from the nozzle heater to the mold. This helps prevent defects such as cold slugs and sprue breaks in the middle of the mold.
In addition, the nozzle can be purged in the same manner as an open nozzle, making it extremely easy to maintain.

SSS/SSMMS Spunbond, spunmelt nonwoven production line:
1) High speed;
2) High capacity;
3) Fine fiber;
4) Reliable performance;
5) Line speed up to 1000 m/min.

Specilized for 1.5M~6M Calender Lines which are applied for Rigd, Semi-rigid and Soft PVC film. It can be used for decoration film, pharmacy packing, super clear film & advertising material.

Rilsan® Fine Powder: Bio-based polyamide powders providing outstanding durability, chemical resistance, and corrosion protection. Ideal for powder coatings, industrial protections.

RESIFRAME is a high-performance surface treatment with excellent release and non-stick properties. It reduces resin and rubber adhesion, enabling mold-release-agent-free molding and minimizing mold deposits. The coating maintains its performance without whitening or degradation after thinner cleaning, and has demonstrated up to 2.5× longer mold life for polyurethane molds and 5.8× longer life for elastomer molds, contributing to lower maintenance costs and higher productivity.

Proposal for the packaging matrials such as strech films

We will preview and demonstrate the Tabletop Crusher, a new machine under development for plastic prototyping following INARI and CONERI.

Until now, few compact machines have made it easy to reuse runners, defective molded parts, and solid lumps of resin generated during prototyping and materials development. Small crushers are relatively easy to install, but their crushing capacity and range of compatible materials can be limited, particularly when handling engineering plastics and high-strength resins. Large industrial crushers offer greater performance, but their space requirements and cost make them impractical for many prototyping environments.

Our Tabletop Crusher is being developed to do more than simply reduce the size of an industrial machine. We aim to create a crusher that is truly useful in prototyping: compact enough to fit in a laboratory or office, yet powerful enough to handle high-strength resins and solid lumps of resin.

Functional masterbatch for spunbond and meltblown nonwoven applications, including color and additive solutions.

PHOENIX™ TPE 19 Series (Shore 20A ~ 65D)
Partly derived from natural feedstocks. Although they contain fewer fossil materials, their properties and processability are equivalent to our conventional TPEs. They are bio-based but not biodegradable. They don’t just have good adhesion to PP ; they can also be recycled.

Bio-based carbon content could be over 50%
Easy to process and colour
Excellent scratch endurance
Excellent weather resistance
Good tensile strength
Overmold to Polypropylene
Meets FDA requirements

Magazine Italia/English

Compatible with powder bed fusion (PBF), this CNF-reinforced PA6 material delivers both strength and lightweighting, catering to low-volume, high-mix and customized fabrication needs such as prototyping and replacement parts.

We specialize in manufacturing plastic crushers, granulators and related recycling equipment for processing plastics, wood, fibers and various industrial materials. To meet the needs of plastic recycling and reprocessing, we offer a wide range of models and customized equipment solutions, helping customers improve processing efficiency and maximize material reuse.

High-quality press molding machine made by PANSTONE in Taiwan.

Silicone TPE Series. Silicone-feel thermoplastic elastomer.
Featuring a perfect self-lubricating, silky-smooth touch, it is the ultimate choice for hand-held tactile products.
The ideal cost-reducing and efficiency-boosting alternative to thermoset silicone products.

Adopting advanced detection technology and equipped with a rapid metal contaminant removal system,
it can quickly and effectively detect metal contaminants mixed into materials such as plastic particles, recycled materials, and crushed materials,
automatically separate them, and effectively prevent clogging of the nozzles and mold hot runners of injection molding machines, extrusion molding machines, etc., as well as screw damage and scratches on molds caused by metal contaminants,
furthermore, it can avoid production line stoppages due to repairs of machinery and molds, improve production efficiency,
and prevent quality problems in injection-molded products caused by metal contamination.

Through hardened HPT series screw is made of imported alloy steel. After high-temperature quenching and tempering
treatment,the hardness of the round rod reaches to HRC60. Under the different types of rough & fine grinding progress,the concentricity of the core diameter and outer diameter reaches 0.03mm. It can meet the high-precision requirements of various products and prolong the screw’s serving life in different applications. HPT series are suitable for plastic material with 25%-65% glass fiber, with wear-resistance, corrosion-resistance, high-temperature resistance, high-pressure resistance, and high-speed resistance property, and they are suitable for fully electrical injection molding machine with high speed and high processing requirements. According to the different customers demands, the PVD coating and Chrome plating are applied to improve the wear-resistance and corrosion-resistance.

Sulzer provides advanced technologies for polymer production, helping manufacturers improve product quality, energy efficiency, and process reliability. SMR/SMX polymer heat exchangers deliver superior heat transfer and temperature control for highly viscous polymers. DEVO devolatilization technology efficiently removes residual monomers and solvents while consuming significantly less energy than conventional steam stripping. SMX/SMXPlus static mixers ensure highly efficient mixing of additives and masterbatches in high-viscosity polymer systems, enabling consistent product quality with low operating and maintenance costs.

By incorporating a high loading of tungsten into EPDM, we achieved a specific gravity of 7.5.
It provides excellent sound insulation and radiation shielding performance.

PY-3008M Flame Retardant Masterbatch is an entirely new system of halogen-free flame retardant functional masterbatch.
This product contains no melamine and is entirely halogen-free, fully compliant with REACH regulations. It exhibits outstanding flame retardant efficiency in thin-walled products. Utilising permanent flame retardant raw materials, this product offers advantages such as high-temperature resistance and ease of processing. It maintains flame retardancy even at temperatures up to 158°C for 2000 hours. The product finds extensive application in high-temperature corrugated pipes, films, spun products, non-woven fabrics, and related fields.

Custom color masterbatch with precise shade matching, strong pigment dispersion and high light fastness across polymers.

Salaveil is a hand cream designed with one top priority: never getting in the way of your work.
A small amount spreads smoothly with a light, non-greasy feel, so you can get back to tasks and desk work right after applying. Fragrance-free and gentle on skin, it suits any workplace or profession.
Now, the expertise in ingredient evaluation and formulation design we’ve built through grease products is being used to protect people’s hands. Starting with your hands, we’ll steadily make everyday work a little more comfortable.

PLASCO specializes in PET strapping extrusion lines engineered for high-strength, heavy-duty packaging applications. With extensive expertise in PET processing, including up to 100% rPET, PLASCO integrates extrusion, stretching, heat-setting, winding and automation into a complete production solution. Each line is engineered around raw material conditions, strap specifications and required output to achieve stable processing, consistent strap performance and efficient production. From process design to line configuration, PLASCO delivers tailor-made solutions for reliable, sustainable PET strapping production.

Designed for the preparation of dumbbell test specimens, this machine delivers micron-level precision slicing of soft materials such as rubber, foams, and high-performance films. Ideal for R&D, quality assurance, prototyping, and mass production, NIPPY offers a complete one-stop solution with both precision slicing machines and contract processing services.

It enables temperature measurement of rotating or moving objects and in locations where wiring is difficult. Compatible with general-purpose temperature sensors as well as voltage and current signals, it supports a wide range of applications. Due to radio wave regulations, use is restricted to Japan.

Two types of lid designs: one type is flat lid, and one type is different shaped lid. The main feature of this series of packaging boxes is Gently close the lid without popping open again

We have manufactured more than 10 million automotive-related components over more than 20 years. Our extensive mass production experience and quality management expertise enable us to meet high quality requirements.

By combining pre-colored metallic molding and pre-colored piano black molding with two-shot molding or insert molding technologies, highly decorative paint-free products can be achieved. Eliminating painting and complex masking processes improves productivity and reduces costs while significantly expanding design flexibility.

DR-2688 is a rutile TiO2 specially designed for polycarbonate and engineering plastics. It provides excellent resistance to polycarbonate degradation and yellowing, good processability and a bluish undertone. Suitable for PC, PC blends and alloys, ABS, PET and PA.

ECO TPU: High-performance bio-based TPU resins with excellent abrasion, tear, and cold-flex resistance.
Produced via fully automated computer-controlled processes using twin-screw extruders, ECO TPU delivers premium, eco-friendly plastic solutions. Exceptional material quality is strictly maintained through precision testing instruments.

It enhances the hydrophilicity of various substrate surfaces, thereby improving adhesion, coating characteristics, and printability.

Features
It generates an atmospheric plasma discharge using high-voltage discharge and air. By directly exposing the substrate surface to the plasma discharge electrons, hydrophilic functional groups are created on the surface, imparting properties such as wettability, adhesion, printability, and coating performance.

◆ Tracking the latest trends in carbon fiber recovery technologies—focusing on CFRP—and their reuse!
◆ A systematic explanation of carbon fiber recycling technologies aimed at achieving the SDGs and the current status of new applications for recycled carbon fiber!
◆ Detailed coverage of state-of-the-art carbon fiber recycling technologies, the development of composite materials using them, challenges regarding real-world implementation, and initiatives by manufacturers!

B5 size: 296 pages
ISBN: 978-4-86043-846-3

■ Supervisor: Toru Kamo

■ Table of Contents
Chapter 1: CFRP Recycling Technologies and Industry Trends
Chapter 2: CFRP Recycling Technologies via Thermal Decomposition
Chapter 3: CFRP Recycling Technologies via Liquid-Phase Processes
Chapter 4: Performance Evaluation Methods for Recycled Carbon Fiber Materials
Chapter 5: Designing CFRP for Recyclability
Chapter 6: Material Development Using Recycled Carbon Fiber
Chapter 7: Production and Molding Technologies for Recycled Carbon Fiber
Chapter 8: Industry Initiatives in CFRP Recycling

Up to 50% more pressurized force in the same dimensions as previous models. Easy to replace, ideal for cutting hard plastic and thick wire, and helps make equipment smaller and lighter.

World-leading rubber injection molding technology. Advanced automation and superior process control deliver outstanding quality and productivity, providing a next-generation solution for rubber manufacturing.

Mold cooling accessories including baffles, plugs, manifolds, flow indicators, and more for efficient injection mold cooling systems. Designed to improve cooling performance, water flow management, and sealing reliability. Various specifications are available to meet different injection molding requirements.

For producing new material for nonwoven wipes.

"SILICOM" is a silicone rubber 3D printer manufactured in Japan using the UV (ultraviolet) curable liquid additive manufacturing method (LAM method) that expands the new possibilities of silicone rubber 3D printing.
Various hardness lineup, colorable, cartridge type materials are used to greatly reduce the time and effort required for setup changes, and unique dedicated slicing software incorporating AI technology enables 3D modeling of silicone rubber that has never existed before.

Maruka Mixing System provides high-pressure polyurethane injection systems based on our extensive experience and expertise in polyurethane metering, mixing, and injection technologies, meeting a wide range of customer production requirements.

We develop specialized equipment tailored to specific applications, materials, and products, including HFO-compatible insulation material injection, In-Mold Coating (IMC), EV battery cell modules, elastomer casting, and automated insulation panel injection. Our high-precision metering and mixing technologies, combined with stable temperature and flow-rate control, enable high-quality and consistent production.

By leveraging our expertise in polyurethane processing, we provide innovative solutions that expand the possibilities of polyurethane and support the next generation of manufacturing.

Silicon casting from 50T to 3000T

Precision mold cooling nipples available in various sizes, thread types, and specifications for injection molding applications. Designed to provide secure connections, reliable sealing, and stable cooling performance. Custom specifications are also available.

We exhibit and supply injection molding machines and molding systems for processing liquid thermosetting materials, including liquid silicone rubber (LSR).

We propose molding system solutions tailored to meet our customers' specific requirements, including applications involving high-mix, low-volume production.

[From top left, clockwise]
Angled Plastic Nippers: Plastic nippers with a steep angle. Capable of cutting resins that are long and wide. Equipped with a stopper bolt to prevent the blades from misalignment. / Mini Top Cutter: Plastic nippers where the blade enters straight from above. Excels in tight spaces. Available in blade widths of 3 and 5 mm. / Top Cutter: Plastic nippers with blades that enter straight from above. Choose from blade widths of 3, 5, 7, and 10 mm. / Edge Plastic Nippers: Plastic nippers with a steep angle. They excel in tight spaces. Choose from flat or curved blades.

As companies are increasingly required to address decarbonization, Scope 3 emissions, CFP and resource circulation, the use of renewable carbon is becoming more important. We propose material solutions that help reduce dependence on fossil-based carbon through plant-derived raw materials, biomass plastics, biodegradable plastics and custom compounding OEM. Our approach is not only for improving environmental image, but also for preparing for future regulations, procurement requirements from major companies and sustainable supply chain management. For companies considering the introduction of environmentally friendly materials, we provide practical material options based on application, required performance and molding process.

Procotex France is specialized in the production of low costs sustainable recycled carbon & aramid fibers in following formats:
Milled carbon fibers from 100 till 300 microns
Milled de-sized carbon fibers from 60 to 180 microns
Chopped sized & unsized carbon fibers from 0.5mm to 72mm
Oversized 6mm carbon fibers (PU, PA, PP, Phenoxy etc)
Oversized 6mm seeded carbon fiber pellets
300 microns carbon fiber granules with different sizings
Both intermediate and standard modulus carbon fibers are available
Chopped para-aramid fibers (0.25mm, 1mm, 3mm, 6mm, 38mm, etc)
1mm para-aramid granules with different sizings

Including Slot-Die Coating, Micro-Gravure Coating, UV Curing Coating. Precision manufacturing technology for coating optical functional materials (such as brightness enhancement, diffusion, anti-glare coatings) onto substrates.

High quality smart mold service table,mold opening closing machine,slide moving mold table.

With the PURITY SCANNER ADVANCED, SIKORA offers a unique system for 100% online inspection with automatic sorting of amorphous and crystalline materials. The system is used by both cable manufacturers and raw material producers. The combination of X-ray technology and a flexible optical system enables the detection and sorting of pellets containing metallic and organic contaminants, both within the pellet and on its surface.

We specialize in the machining of thermosetting resins such as Bakelite, glass epoxy, and insulating materials.

Our Film inspection systems use cutting-edge machine vision and illumination design. Utilizing the latest area scan camera technology, we employ different types of illumination for enhanced defect detection capabilities - bright field, dark field, distortion measurement and more – all using a single array of cameras.
Our unique design based on area cameras enables optimal viewing angles regardless of film width or limited installation space and allows robust detection unaffected by film vibrations.

Main Feature
Detection of the complete range of defects including scratches, crystals, gels, bubbles, black specks, contamination, etc
capable of inspection films with gusset folds and multi color films.
100% on-line distortion measurement for optical films
Line-stream integration, slitting, rewinding, marking
Complete run documentation

SSK Group focuses on the manufacturing of specialized and advanced high-tech waste tire recycling equipment, enabling the reuse of rubber, steel wire, and nylon by precisely degrading the steel wire and rubber inside tires.

TBC is widely used in polyolefin, PVC, foam polyurethane, polystyrene (PS, XPS), ABS, PP, unsaturated polyester, various synthetic rubbers and synthetic fibers and other products, with compatibility, durability, light resistance, good water resistance and other characteristics. At the same time, it has a good effect in textile flame retardant treatment.

Lynx EVO is a high-performance eyepiece-less stereo microscope (3D viewer) with a zoom function, equipped with Vision Engineering's patented

Engineered by Yensheng Machinery for high-barrier aseptic liquid packaging (dairy, juice, plant-based beverages, and liquid foods), this Extrusion Lamination Line features an inline tandem architecture with 3 laminating stations and dual unwinders.

Designed for seamless one-pass continuous production, the system achieves:

Substrate Lamination: High-precision bonding of heavy paperboard and high-barrier aluminum foil.

Dual-Side Sealing & Coating: Precise extrusion coating on both the outer paperboard (waterproofing/protection) and the inner aluminum foil (food-grade PE/PP heat-seal layer).

Combining superior gas/moisture barriers, high peel strength, and advanced automation, this line complies with strict international aseptic packaging standards, delivering an optimal high-capacity, premium-quality solution.

The Coolant Case is a dedicated enclosure that supplies coolant, or cutting fluid, while machining with KitMill to improve machining accuracy. It is particularly effective for mold making, where the quality of the machined surface directly affects the quality of the molded part.

The coolant helps prevent material from adhering to the cutting tool, while carrying away chips to reduce machining problems and support precise cutting. The inside of the case can also be cleaned quickly and easily, creating a more comfortable workspace where you can focus on research and development.

Product page: https://www.originalmind.co.jp/products/coolant

This ESD rubber pad is designed to provide electrostatic discharge protection during the handling of semiconductors and electronic components. Its surface resistance is controlled within the range of 10⁶–10⁹ Ω, helping to reduce the risk of electrostatic damage to sensitive electronic devices.

This is a high-performance PVD coating that suppresses surface roughness formation. It is effective against galling, corrosion, and poor mold release in cold forming. It is compatible with polished finish molds and high-precision molds, as well as realizing improved moldability.

Key features:
1. Unique smooth coating technology
- For typical PVD coatings (AIP), microscopic irregularities called droplets are formed on the surface.
- We have developed our own PVD technology (HCD/UBMS) to provide smooth coatings with suppressed formation of droplets.

2. No galling, no adhesion
- In cold molding with soft materials may cause

This is an oil-based additive designed to prevent static electricity problems caused by agitation during plastic processing. It has been adopted, for example, to eliminate color inconsistencies in extruded products.

High quality mold transfer vehicle.

The J 2-12 PVC AS Suction Hose is specially engineered for the plastics industry, industrial de-dusting, and abrasive material handling. Featuring an antistatic PVC wall reinforced with a rigid PVC spiral, it delivers exceptional durability, high vacuum resistance, and essential static dissipation for smooth material flow.

Applications:

1. Plastics Industry: Ideal for central material conveying systems, handling plastic granules, powders, and raw resin.

2. Industrial Vacuum & Dust Extraction: Suction and transfer of abrasive solids such as dust, powders, fibers, chips, and granules.

3. General Industrial Use: De-dusting and suction plants, industrial vacuum cleaners, and suction of paper/textile fibers.

NIPPECO water-based cleaning splution effectively remove and inhibit scale and rust in the temperature control piping of resin molds.

Our Single Shaft Shredder is designed for efficient and reliable size reduction of a wide range of plastic materials, including PP, PE, ABS, HDPE, plastic lumps, pipes, profiles and production waste. Featuring low-speed, high-torque operation, the machine provides powerful shredding performance with low noise and stable operation. The robust rotor and cutting system are designed for demanding recycling applications. Various configurations are available according to material characteristics, required capacity and final particle size, providing flexible solutions for different plastic recycling needs.

Engineered for premium coffee cups and paper lunch boxes, this high-efficiency double-sided PE coating machine achieves speeds up to 400 m/min, significantly boosting productivity while ensuring superior water and grease resistance.

We process a wide range of plastic materials, from general-purpose resins to super engineering plastics, and manufacture plastic components for various industries, including home appliances, industrial equipment, and automotive applications.

“Recycle Without Melting” Eco pellet GP-3 handles thick, rigid, and wide films that are difficult to recycle with the GP-2.
The eco pellet GP-3 is a film re-pelletizing machine that combines the GP-2’s proprietary twisting method with heater units.

By gently softening film at a temperature below its melting point, the GP-3 makes the film easier to twist and stretch, enabling the recycling of films that are difficult to process with the GP-2.
Its dual-heating system, combining heater tubes and heated stretching rollers, efficiently softens the film without causing thermal degradation, producing high-density recycled pellets.

Furthermore, with the newly developed Power Booster, the GP-3 can process materials with a cross-sectional area of up to 30 mm², further expanding the range of materials that can be re-pelletized.

World-leading IBC and industrial packaging manufacturing technology. Advanced extrusion blow molding systems delivering outstanding product quality and high productivity.

Energy Dispersive X-ray Fluorescence Spectrometer is an instrument used to determine the types and amounts of elements present in a sample by analyzing the energy (wavelength) and intensity of the fluorescent X-rays generated when the sample is irradiated with X-rays.
This instrument is suitable for analyzing metallic elements derived from catalysts and additives in recycled plastics.

CAS NO. : 2082-79-3
This product is widely used in polyethylene, polypropylene, polyformaldehyde, ABS resin, polystyrene, polyvinyl alcohol, engineering plastics, synthetic rubber and petroleum products, with a synergistic effect of significant, can effectively inhibit the thermal degradation and oxidative degradation of the polymer, the general dosage of 0.1% ~ 0.5%.

High torque cam drive mechanism:
Precision processed machine bed offers high accuracy and powerful cutting torque.

Servo feed system:
Servomotor driven steel feed roller offers precision positioning.

Automatic stack/count function:
Based on quantity setting, automated stacking and discharge functions effectively reduce manpower consumption.

Automatic mold release device:
Servo-driven mechanism ensures fine-tuning position and speed of mold release.

HMI system:
Offers direct parameter setting of 99 functions in the memory.

Waste-reel device:
Waste material is automatically reeled, for subsequent chipping on completion of reeling.

Automatic lubrication system:
Automatic oil feed for slide parts, totally eliminating part failure resulting from insufficient lubrication.

HMI system:
Latest model Siemens control system offers user-friendly operation interface and powerful functionality.

Alignment mechanism of innovative materia:
No wrench or spanner required for adjusting material width; fine-tuning achieved quickly and easily.

Soft plastics are efficiently washed inside a large centrifugal drum using impact action and centrifugal force. The center-section secondary water spray system enables additional cleaning, achieving higher washing performance.

USED FOR TRACEABILITY OF PLASTIC INJECTION MOLDING. MANUFACTURING DATE, MONTH, TYPE OF MATERIAL ARE MARKED ON PLASTIC PRODUCTS.

High-performance color masterbatch with excellent pigment dispersion and stable coloring performance. Customized color matching and functional modifications are available to meet various application requirements. Suitable for PP, PE, ABS, PA, and other resin systems, our masterbatch is widely used in automotive parts, electrical & electronic components, packaging materials, and daily products.

We are launching and exhibiting for the first time the new "KCAS Series" of air-cooled chillers and temperature control units, which standardly feature inverters.
Compared to previous models, this series offers significantly improved energy efficiency and cooling capacity.
* * * * * *
•Simultaneous use of refrigerant and cooling water is possible
•No cooling water piping or cooling tower equipment required
•Modbus and SPI communication functions are standard features

Precision mold cooling couplings available in a wide range of sizes, thread types, and specifications. Designed for reliable sealing and stable performance in injection molding applications. Custom specifications are also available.

This extruder is ideal for developing high-value materials, as it enables testing and evaluation with only a small amount of raw material.

Chun Tai Machinery offers state-of-the-art equipment for producing square and diamond-shaped plastic nets, including the Square Shape Net Making Machine and the Diamond Shape Plastic Net Making Machine. These machines efficiently manufacture high-quality nets, meeting the specific requirements of diverse application scenarios.
Square and diamond-shaped plastic nets are widely used across various industries, including construction fencing, agricultural cultivation, livestock breeding, fishery aquaculture, and soil and water conservation. Their structural designs provide multifunctional benefits, ensuring stability and adaptability for diverse applications.

The automatic date stamp rotates automatically by air pressure inside the mold, reliably displaying the production date or serial number on molded products.

We will demonstrate compound molding using recycled materials and coloring agents.
By integrating the compounding process, which was previously conducted as a separate operation, with injection molding,
we contribute to reducing manufacturing costs and improving production efficiency. Since this system is configured by combining a compounding device with a general-purpose molding machine,
it can also be used as a standard general-purpose molding machine.

We specialize in the manufacturing of insert metal components for resin and rubber molding.

HELISTAR LCS pillow block type tension sensor: 50–2,000 N rated load, repeatability < ±0.3% F.S., linearity < ±0.5% F.S. Pairs with the TCP-818D controller and magnetic powder brakes for closed-loop tension control.

SHELLTEC turns waste shells into patented materials combining unique design with measurable CO₂ reductions.

Agglomerated materials that are normally difficult and dangerous to process can be efficiently crushed by the DG-600’s powerful rotating force and fixed blade structure, achieving stable production of up to 400 kg/h with particle sizes of φ8 mm or smaller.

GT-200DX delivers fast, precise cutting with smart PID control, Auto-Tuning, up to 200°C, and comprehensive safety alarms.

AC103 is a solid aldehyde scavenger, it's good for heat resistance and selectivity.
It can capture acetaldehyde which is difficult to remove using conventional scavengers, and other compounds containing aldehyde or ketone groups.
Because these compounds are captured through a unique chemical bonding mechanism, there is no concern about re-emission.
In addition, AC103 has excellent heat resistance due to its solid form and silica-based framework.
Its capture performance will be maintained when exposed to temperatures over 200°C ,during mixing with resins.
When using recycled resins, users are concerned about VOC emissions and odors.
AC103 is able to catch those harmful substances.
And, it also helps minimize adverse effects on resin properties, because it is effective at low addition levels.
By solving these problems, Our product supports quality improvement and increasing use of recycled resins.
We offer two product forms, powder and masterbatch.
it allows customers to select the most suitable option according to their application and process.
Consultation regarding VOC analysis is also available.

High-Speed 20 m/s Instrumented Impact Tester

The XC Series consists of functional additives designed to promote char formation, suppress smoke, and reduce heat release. Please visit our booth for detailed product information.

Turn table foaming (Clean-Foam) 2K IMM / Tie bar-Less Platen
- Equipped with WOOJIN PLAIMM's proprietary Clean-Foam technology, enabling turntable-based two-color molding with a solid skin and foamed core structure

Compatible with a wide range of sizes, including containers and cardboard boxes.
Airless operation ensures smooth on-site movement and installation.
In addition to direct feeding from Takeout Robots, we can accommodate various options tailored to specific needs, such as cooling or part alignment.

Masterbatch carrying plant-derived cellulose fibre at 50-60%, on three carriers: PP (MCF-7324), PE (MCF-7325) and biodegradable PLA (MCF-7326). It secures biomass content, reduces weight and raises stiffness at once, with let-down designed around the biomass content you must meet. Unlike mineral fillers it has a low specific gravity, so the part is no heavier at the same loading, and under 1% inorganic content means far less screw and die wear. Fibre grades run from a few microns to several hundred microns - cellulose fibre, not CNF - and length is chosen for reinforcement or for texture. Cellulose is heat-sensitive, carries moisture and has a low bulk density; all three work against high loading. We use a screw configuration reserved for heat-sensitive materials and gravimetric side feeders, so the target loading is reached without discolouration. Replacing fossil resin also lowers the part's carbon footprint. Typical uses: eco-conscious packaging, household goods, parts with a biomass requirement. These grades are at development and sampling stage; specifications may change with evaluation, and we propose a joint trial in your resin. Booth 20115.

T-90M is a high-performance heat-resistant masterbatch specifically designed for polyamide products. It provides exceptional thermal protection for polyamide materials, primarily enhancing their resistance to thermal-oxidative aging. This effectively prevents heat-induced aging that causes polyamide discoloration, loss of gloss, surface chalking, and deterioration of mechanical properties. It delivers significant results at low addition levels.

This is a high-performance extruder that utilizes high vacuum and a multi-screw design.
It excels at removing volatile impurities such as moisture, gases, oils, ink, and odors.
With eight multi-rotation screws rotating in the opposite direction of the main screw,
it creates 40 times the polymer surface area compared to a twin-screw extruder.
The lineup consists of three main models: OMNI, OMNImax, and OMNIboost.
The OMNI and OMNImax models consist of a multi-screw (MRS) extruder combined with a high-vacuum system (vacuum pressure ranging from 1 millibar to 25 millibars).
The OMNIboost is specifically designed for PET resin and features a multi-dimensional system (MDS) extruder combined with a liquid-phase polymerization unit.
These extruders are FDA-certified and designed to enable horizontal recycling.

The Italian ICMA Twin-Screw Extruder is a top-tier compounding machine trusted by European chemical manufacturers. Its superior co-rotating design ensures exceptional kneading, perfectly dispersing fillers and recycled materials. Furthermore, ICMA’s unique water stripping technology delivers unmatched degassing and deodorization, reducing odors by up to 95% to produce premium, high-value pellets.

Everplast medical tube extrusion lines deliver ultra-precision, high-speed line speeds up to 150 m/min.

Everplast high-precision medical tube extrusion systems are meticulously engineered to meet the stringent demands of healthcare and pharmaceutical manufacturing. Designed for cleanroom compatibility, our advanced lines specialize in producing critical medical tubing, including infusion sets, IV catheters, oxygen masks, dialysis lines, and multi-lumen catheters at industry-leading line speeds of up to 150 m/min.

Our systems feature advanced single-screw extruders with specialized barrier screws that ensure uniform melt homogeneity and stable pressure control. Equipped with high-precision vacuum sizing tanks, laser diameter gauges, and micro-tolerance closed-loop speed synchronization, Everplast lines guarantee exact inner/outer diameters and wall thickness consistency. Engineered for zero contamination, smooth interior/exterior surfaces, and high-speed stable output, our turnkey medical extrusion solutions empower manufacturers to achieve flawless regulatory compliance and uncompromising patient safety.

LFRT: Combines thermoplastic flexibility & long-fiber strength for continuous-fiber rigidity and fast molding.
LFRT merges thermoplastic processability with long-fiber strength, delivering continuous-fiber rigidity and rapid-cycle injection molding capability.

Applications:
• Automotive: Engine bay, seat, dashboard, and battery base frames, door panels, pedals, fender aprons, spare tire carriers.
• Electronics: High-precision connectors, printer structural components, 3C product frames.
• Petrochemical: Corrosion & abrasion-resistant parts, grating platforms, filtration equipment & reactor components.
• Others: Bicycle seat frames, snowboards, exercise equipment parts & pedals, safety boot toe caps, safety helmets.

World's fastest rewinding technology. Delivering high-precision, high-efficiency production for a wide range of materials, including stretch film and aluminum foil.

IN-LINE PLASTIC PELLET PRODUCTION MONITORING AND SORTING - Cost effective solutions for inspecting each pellet produced

inspec.tech offers an innovative solution for the in-line inspection of plastic pellets using the latest machine vision technologies and specialized lighting solutions.
The plastic pellet inspection system’s simple mechanical design is engineered for easy integration into existing production lines, providing a comprehensive inspection solution for the entire production stream, throughput optimization, and quality assurance.
The basic system supports throughput of 1,000 kg/ hr (2,200 lbs/hr), Systems up to 9,000 kg/h (19,800 lbs/hr) are available as standard.

Detection Capabilities
Impurities in the material
Median pellet size variation and pellet size distribution
Tails caused by improper cutting
Angel hair, fines, and streamers caused by the transfer system
Color variations
Cross-contamination

Advantages
Assure quality of manufactured or consumed pellets and automatically sort disqualified pellets inline.
Enable continuous process monitoring and optimization using objective, comprehensive quality standards.
Safely extend your preventive maintenance intervals.

Introducing a new energy-saving, high-output, self-propelled extruder equipped with a laser filter. Featuring a built-in heater, it achieves excellent heating speed and temperature retention performance, and is receiving high acclaim in the market.

DJK provides contract research and development support services specializing in resin materials, composite materials, and rubber/elastomers.
1.Specialization in polymer material development support
Offers comprehensive, one-stop services ranging from polymerization experiments to performance evaluation.
2.Impartial, neutral, and objective approach
Has operated as an independent third-party organization for 60 years since its founding.
3.Waiver of all intellectual property rights
All ideas and results generated during the course of contract research belong entirely to the client.

CIM (Ceramic Injection Molding) combines the mass-production efficiency of injection molding with the advanced functionality of fine ceramics, enabling complex and precise ceramic parts without secondary processing. Unlike press molding or machining, it generates less material waste, uses relatively affordable molds, and remains cost-competitive from small-lot to mass production. Building on our precision molding expertise, we have advanced to precision CIM with dimensional tolerances in the 1µm range, with proven results including radial tolerances within 0.08mm, surface roughness around Ra0.2, and tolerances within 3µm. We support a wide range of materials — alumina, zirconia, silicon carbide, silicon nitride, and more — leveraging heat resistance above 1000°C, excellent wear resistance, and biocompatibility for applications in medical devices (implants), optical communications and electronic components, and sensors/semiconductors. We position this as our core process for meeting the growing demand for miniaturization and higher functionality.
Above is the English translation.

Achieve 100% Inspection with Next-Generation Non-Contact 3D Inspection Technology, Enhancing Both Quality Assurance and Productivity.

We provide customers with thermoplastics composite prepregs and laminate sheets featuring a wide variety of functional plastics combined with different types of fibers. Through fully customized services, we meet the application demands of diverse industries and products.

Designed for easy cleaning and maintenance to accommodate high-mix, low-volume production.
Cost reductions have been achieved through parts standardization and increased use of common components, while maintaining performance and quality.

ecomaru uses glass wool (GW), whose fibers are finer, softer, and shorter than conventional glass fiber (GF). This distinctive fiber structure provides countless microscopic glass-fiber edges and an exceptionally large specific surface area, enabling the cleaning material to make more effective contact with unwanted residues. As a result, contaminants adhering to equipment surfaces can be efficiently scraped away and removed. Because GW fibers are flexible and have a smaller diameter, they can reach areas that are difficult for thicker, more rigid fibers to access. The numerous fine edges work throughout the cleaning process, while the extensive surface area increases contact with residual material. Through this combination of fine fibers, flexibility, abundant fiber edges, and superior surface coverage, ecomaru delivers a powerful and efficient cleaning effect. Its use of GW instead of standard GF is a key feature that enhances residue-removal performance and helps achieve a higher level of cleanliness. By taking advantage of the unique physical properties of glass wool, ecomaru effectively strips away unwanted substances and provides high cleaning performance.

An additive added to attain a matte finish and/or to lower the gloss of a plastic part. Effective in lowering gloss of ABS, PC/ABS, PC/ASA alloy, ASA and keep the physical properties of resin.

Benefits
- Excellent compatibility with styrenic resin
- Reduces gloss with keep physical properties
- Organic product

Application examples
- Automotive interior and exterior parts, Home Appliances, Vinyl Siding, Trim Work, Print stock.

The EEPG-63A & EEPG-100A Non-Contact Type Pressure Gauge with Switch is manufactured under the FTB-Developed and Patent-Pending Technology for the core contact system of the gauge using the

A compact bench-top blasting machine that combines cleaning and surface treatment in a single unit.

The use of a fine-diameter nozzle enables precise and highly detailed blasting, making it suitable for precision components and other delicate workpieces. From removing contaminants to mold polishing and finishing, a wide range of applications can be handled with one machine.

Its compact design makes it easy to install and operate even in limited spaces, providing an efficient solution where workspace is at a premium.

In‑mold labeling (IML) is a packaging and decoration technology where a pre‑printed label is placed inside the mold during injection or blow molding, fusing seamlessly with the product surface. This integration ensures the label is highly durable, resistant to moisture, abrasion, and chemicals, and prevents peeling or fading. IML is widely applied to food containers, cosmetic bottles, and appliance housings, enhancing both aesthetics and functionality. Because the label becomes part of the container, recycling is simplified, eliminating the need for separation and supporting eco‑friendly practices. Another advantage is the ability to achieve high‑quality, detailed printing, allowing brand logos, safety warnings, and product information to be displayed with clarity. By completing decoration during molding, IML reduces post‑processing steps, improving production efficiency and lowering costs. Overall, IML combines durability, sustainability, and design flexibility, making it a preferred solution for industries seeking premium packaging and strong brand identity.

This system pneumatically collects and conveys continuous edge trim generated during the manufacturing and processing of films, foils, paper, and other materials.
Edge trim is continuously extracted from the production line and conveyed to a designated collection or processing point.